0
Crown molding adds style and a finished touch to rooms that need a little help with decor.
Crown molding is the topmost molding that is installed where the wall meets the ceiling
and adding it can change the look and feel of a room instantly. There are many types of
crown molding available in various woods and synthetic materials like Styrofoam and
plastic. With new lighter weight materials, installing crown molding is no longer a tedious
job for a carpenter and can be a home project that the homeowner can do with some
direction and skill.
Choosing The Crown Molding
Crown molding is available in many different designs and heights, so the style of the
room is important. Tips for selecting the right crown molding for the space:
* Ceiling height - the lower the ceiling height, the simpler and smaller the molding.
Adding a heavy, ornate crown molding to a room with an 8’ ceiling is not a good idea
because crown molding will visually lower the ceiling height. Keep it simple and small for
low ceilings. Heavy, decorative molding is great for ceiling heights above 10’ that can
afford the loss of height.
* Room style - coordinate the style and feeling of the room with the style of the crown
molding. If the house is extremely modern, a heavy, decorative traditional molding will not
blend well with the decor and will visually detract from the simple image and feel of the
modern space.
* Finish - decide on paint or stain. The finish should coordinate and complement the
decor in the room. If stain is better, crown molding is available in a variety of woods such
as pine, poplar, oak, maple and cherry. If paint is better, wood or synthetic moldings are
appropriate, but the synthetics like foam, Styrofoam or mdf are much lighter, cheaper and
easier to install.
Making The Purchase
* Estimating material - measure around the room on the floor or the wall. Measure each
wall length, then total it and add another 10 - 15% for waste. Crown molding comes in
precut lengths: wood moldings are usually in 12’ or 16’ lengths; foam moldings are 8’.
Example: if all 4 walls (15’ each) total 60’ + 15% waste (addl. 9’) = 69’ needed. If the
molding comes in 8’ lengths: 69 divided by 8 = 8.625 pieces - round up to 9 pieces.
* Delivery - remember that crown molding comes in precut lengths, the smallest is 8’.
Most local companies will allow customer pickups, but if you can’t accommodate the sizes
it’s best to schedule a delivery. Most local companies will deliver materials either free or
for a nominal charge.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Is the name for trim along a ceiling spelled crown molding?
Yes, the name for trim along a ceiling spelled crown molding.NOTE 1: American English the name is spelled Crown Molding.NOTE 2: British English the name is spelled Crown Moulding.This molding hides the line where a wall meets the ceiling. Crown molding, whether plain or decorative, adds interest to a room. It comes in plain wood that needs painted or stained, or it can be bought pre-painted or stained. The corners must be mitered, usually at 45-degree cuts -- e.g. cut at an angle to meet the next piece. Here is a video about cutting and installing Crown molding.
How to Create Dramatic Changes Throughout Your Home by Installing Crown Molding?
Crown molding can help to create an elegant and luxurious environment in any room throughout your home. Available in many different styles, from a simple flat design to more sophisticated art deco designs, there are styles of crown molding to create the perfect custom designed look you are looking for.Installing crown molding within your home is something you can do on your own if you have the right tools, materials and a few hours of time to spare. For a fraction of the costs and time that are required to hire professional contractors to create custom designed looks in your home, you can have a unique and appealing space that you can create with your own two hands.Tools and Materials Needed to Install Your Own Crown MoldingWhen you plan on installing crown molding in a room, you will need some basic household tools. This includes a hammer, finishing nails, measuring tape and a miter saw. You can use an air finishing nail gun if you have one available, however, it is not necessary.The materials you will need to have on hand include finishing nails, wood putty and enough crown molding to finish your project. You will also need to have stain, paint, paint brushes and rags available if you are working with unfinished crown molding which you will want to paint when you are done installing. Some safety materials you will need to have includes work gloves and safety glasses.Installing Your Crown Molding throughout Your HomeTo begin, you will need to decide where you want to install your crown molding. Using your measuring tape, you will need to measure the exact amount of molding that will be needed. Use your miter saw to cut any angles that will be used for joining the various corners of the crown molding together. It is important to make sure that you cut these corner angles precise, because if not, there will be noticeable gaps in your corner connections.Using your hammer and finishing nails, secure the crown molding in place. If you are using an air finishing nail gun, hold it flush with the crown molding to prevent the finishing nails from bouncing back and injuring you. Fill in all visible nail holes with your wood putty, making sure that you wipe off the excess putty as necessary. Allow the wood putty to dry for four to six hours.Go over your crown molding with fine grit sandpaper if there are rough spots or areas of wood putty that stand out. You are now ready to paint or sand your crown molding if you are planning on doing so.You will notice the results immediately on the dramatic changes that installing crown molding can be. If you plan on installing crown molding in other areas of your home, you can do so using this same method on almost all rooms.
How to paint using a Power painter on crown molding?
First, when painting crown molding, you will need to find an out of the way place for painting in. This place must fit the following criteria... * have sufficient square footage to accommodate all of the crown molding laid out flat and allow room for you to safely reach every inch of every stick. (painting crown molding is difficult if you can't reach it) * is totally dry. Do Not let your painted crown molding sit outside over night where it is vulnerable to dew or fog. * is safe from air born dust, dirt, leaves etc. Cover the entire floor space with painters plastic and lay out the crown molding in rows. For easy painting of your crown molding, it's best to group the rows in three to five sticks depending on your arm length. Also it is much easier to paint if they are raised up off the ground. I use buckets and 2x4s to do this. If you crown molding is white already then it is primered, you can skip that step. If not you will need to apply a coat of primer to seal the molding. No need to go very thick with it, one coat will do. Once dry, sand the primer coat lightly.Applying Paint:Generously apply the paint to two sticks at a time. Keep the spray nozzle consistently at the same distance from the crown molding (read the instructions on the box for the exact space)Repeat the process for all the sticks and apply a second coat once dry.
With 8 ft ceilings would a counter height dining room table dwarf the room?
I would but you could add crown molding and different colored paints to give the ceiling a higher appearance.
How high should you place curtains on 9 feet cielings?
The higher , the better, even just under the crown molding if you have it. This gives the room an elegant expansive look.
How To Install Crown Molding?
No one wants a dull room with plain walls and nothing decorative to accent that particular room. Why not add crown modeling to your existing walls so that it will give that spice you were looking for. It is fairly easy to install. And yes working over your head can be exhausting but the results are well worth it. Here is a step by step guide to help you along the way with installing crown molding.Step 1. Measurements come first. Measure around the top of the walls to get the linear footage required for the job. Add a little extra to your final measurement so you can account for any miscalculations.Step 2. Pick out the style of molding you want for that room. Make sure you buy the finish as well.Step 3. It is best to by your molding in lengths that require less splicing. But sometimes splicing can not be avoided when the room is big.Step 4. Stain or paint your molding and allow for adequate drying time.Step 5. Cut the needed angles for the corners. Using a miter saw is best to achieve the results you are looking for.Step 6. Set up your work area so that you have everything handy.Step 7. Take the first piece of molding and place it into the corner of the wall. Next you will need to cope cut the second piece that will be joining the angle in the corner. This is best achieved with the use of a miter saw.Step 8. Take your utility knife and trim the excess the saw left behind.Step 9. Now it is time to figure out the location of the joist. Drill holes to avoid the molding from splitting.Step 10. Secure the molding with just a few nails. Be sure to use nails according to the thickness of your molding. If you are satisfied with the position, finish nailing it up.Step 11. Use nail set to countersink the rest of the nails.Step 12. Now its time to fill in all nail holes with wood putty. Also use wood putty to cover any small gaps where the molding was joined.Step 13. Use the same finish as you did on the molding on the nail holes and areas you used wood putty.
What is the average cost to have crown molding installed?
, I'm going to talk a little about the cost of crown molding. The average cost of crown molding varies from state to state with the cost of living. When it comes to crown molding most contractors will charge by the linear foot (Linear feet just means any distance or length measured in feet). Some contractors will charge by the corner. When I estimate for crown molding here in Richmond Virginia, I charge by the linear foot. My price for crown molding includes the material cost of the crown molding, and the labor cost of installing the crown molding. You can also get a price for painting the crown molding. If your taking on the job yourself you can purchase the molding at a local Home depot or Lowe's whichever you prefer or you could save yourself about 40 cents/linear foot if you find a local mill work/lumber yard.
How many feet of molding is needed if a room is 16 foot by 14 foot?
16 * 2 + 14 * 2 = 50 feet of molding.
What Are Some Easy Home Decorators to Make?
Some simple decorations can be new curtains, crown molding installation, chair rail installation or even painting a room. Re arranging furniture can give a room a more open feel and only cost a little bit of time.
Do I need a contractor to add crown molding to my living room?
If you are not a very do-it-yourself kind of person, then yes, you may want to hire someone else to do this task for you. It shouldn't be very difficult, so it really just depends on how you feel about it.
How do you figure out the amount of wood needed to for a rectangular living room measuring 26 feet long and 18 feet wide?
Well, if you want it on the floor throught the room you need 468 square feet of wood, but if you are, say, crown molding u need 88 square feet of wood.
Purchase a car with options do you get the original equipment?
If you are looking to buy a new bookcase, you will have many options to choose from. Two of these options are size and style.SizeOne of the first items you will want to consider when choosing a bookcase is the size. Decide how much space you have for the bookcase you want. Taking measurements before shopping is a good idea. Keep in mind the width, height and depth of the bookcase you want as opposed to the space you have for it. Bookcases also come with anywhere from two to five shelves. Of course, the fewer the shelves, the shorter the bookcase. So, if height is a concern, you will want to stick with two or three shelves.StyleWhile shopping for your new bookcase, you will find that their are many styles to choose from. There are also many wood colors. If your room decor is very casual, you may want to choose a mission-style bookcase in a light color. Maple or oak would be good choices for this. If you are looking for a more formal look, a darker wood may work best. Espresso is a very popular color for bookcases. It has a deep, rich color to it. You may want to choose a wood that matches other pieces of furniture in the room. This will give the room a cohesive look. If you already have a specific style of furniture pieces in a room, you may want to shop for bookcases that will have that same style. When looking for bookcases, you will find that they range from the plain and functional to the ornate and beautiful. Many bookcases use molding to spice up the style. Some have crown molding at the top of the bookcase to give the furniture a classic and stylish look. Even with the molding, you will have many options. Another option altogether is to buy a plain bookcase and add molding to it for a custom look. You can choose crown molding that will either match or complement other furniture pieces in the room.Bookcases are no longer simply a functional piece of furniture. They can also be a beautiful piece of furniture that complements other pieces in your room and reflects your personality.
