0
A programmable logic controller is a small computer device that records information in real time and sends the results to another location. These instruments are commmonly found in automobiles, heavy equipment, medical sensors and large machinery. Programming and designing these units calls for some specific edcuation and training.
There are a number of traditional and online technical schools that offer undergraduate degree programs for those wanting to design PLC units. These courses involve a complete understanding of data transfer and computer application design. Manufacturers often change how their products behave, meaning that new PLC units are constantly being created.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How much an PLC have outputs and inputs maximum?
There are PLC with fixed inputs and outputs. There are modular ones which can be added on with inputs and outputs. So number of input and output of a PLC is actually based on the type of PLC you choose. Different types are available in the market.
What makes PLC communicate with SCADA?
There are different communication protocols between PLC and the SCADA. Popular SCADA being PC based, most used communication protocol is ethernet/IP. The PLC tags are used to build the objects in SCADA so that Actions or states or status or parameters of PLC are displayed on SCADA.
What are the solutions for LogixPro PLC Lab Manual?
Ch 4
How many Input and outputs s7 200 plc have?
s7-200 have 14 inputs and 10 outputs that can be relay or transistors. Check out www tmartis com for affordable plc and modules.
I am facing the temperature dissimilatory issue, installed PLC is S7300, there is lot of sensors (thermocouple and RTDs) are installed. even replaced the sensors and plc analog modules with new with front connectors?
so they can learn
Explain online and off-line programming for PLC what is their advantages and disadvantages?
Off-line programming: allows development and modification of programs without having to be connected to the PLC processor On-line programming: ability to create and modify and monitor program sequences and data while the PLC processor is on-line and in the RUN mode
What does plc chips stand for?
PLC stands for Programmable Logic Controller. Depending on the type of PLC, you can implement arbitrary logic, including sequential state generation if need be, by simply programming the PLC.
Which laptop is use for PLC programming?
Almost any PC can be used for programming almost any PLC system The programming interface will be either a serial port, a USB port of increasingly, an Ethernet port. The PC will usually require the appropriate development software that is supplied, in most cases, byt eh PLC manufacturer.
What are some companies that offer PLC programming training?
Many technical training colleges and institutes offer PLC programming training courses. Some of these include AmericanTrainCo.com, GBTechTraining.com, PLCTechnician.com and many others.
Where can I get PLC programming?
The American Train Company offers hands on instruction and claims to be inexpensive. You can find more information at www.americantrainco.com/PLC-Seminars.
What is PLC programming and who uses it?
PLC stands for "programmable logic controller". PLC's are usually used to control machinery in automated processes such as manufacturing. PLC programmers usually complete a trade school certificate before starting their careers.
Where could one learn about PLC programming?
There are a variety of institutions that offer courses in PLC programming. The University of Phoenix and Colorado Tech, for example, both offer these courses. Alternatively, one can watch short video tutorials on YouTube.
What is interlock in PLC programming?
A series of conditions must be met to affect an output condition.
What is PLC programming does it have to do with computers?
PLC stands for Programmable logic controller. It is used in factory settings and can control machines and basically automates electrical outputs and procedures.
What is the plc training about?
PLC stands for programmable logic controller. There are three main areas of study involved with plc training 1) computers 2) interface or I/O 3)programming. This website may give you more information. http://thelearningpit.com/plc/plcs.html
What is ladar in robotics?
Ladder logic is the programming scheme used when programming most control systems, such as robotic controllers. It's most common when programming a PLC (Programmable Logic Controller)
What is the role of programming language in designing and developing a system?
System Anylist
