0
High efficiency furnaces are gas units that use less fossil fuel to operate when compared with their traditional, single-stage counterparts. These units have an AFUE, or annual fuel utilization efficiency of at least 80%, with most on today's market having 90%. The AFUE rating indicates the amount of heat delivered as opposed to how much heat is lost or used. High efficiency furnaces have two-stage burners, which allow the furnace to operate at a lower level when weather outside is milder. Further augment efficiency are optional two-stage blowers which deliver warm at at a higher rate, also when needed.
What else can I help you with?
Are there any high efficiency furnaces in department stores?
Yes, high efficiency furnaces are available from department stores such as Sears. The top five brands of high efficiency furnaces available in department stores are Peerless, Empire, Williams, Burnham, and Quietside.
Will the gas go on and off until it reaches the correct heat in a gas furnace?
Yes, the thermostat in your home causes the gas valve to come on inside the furnace, although in some of the newer, high efficiency furnaces the process is a little more complicated. Furnaces usually detect the temprature inside the plenum and turn on the blower to move warm air into the home. Once the home is up to temperature, the gas is shut off and the blower will run until the plenum is cooled. The gas should not go off and on until it reaches the desired temperature. The gas should come on and the burners should stay lit until the desired temperature is reached. If this is not the case and the burners come on and off, you have a problem. If the burners come on and stay on until the temp set on your thermostat is reached then all is well. If you notice your burners are not lit and the temp is not reached and the blower is on, then you have a problem that needs a service tech. Your filter could be clogged or your flue pipe could be blocked or there may be a problem with your high limit.
What are some companies that manufacture waste oil furnaces?
There are many companies that manufacture waste oil furnaces. One company is Tervita. They are a very well regarded company and have very high ratings.
What are the benefits of getting a Rheem gas furnace?
Rheem gas furnaces offers some of the finest heating solutions in the business. They use the latest technology to offer high-efficiency furnaces and they guarantee lasting performance with great warranties.
Rheem Gas Furnaces?
Rheem furnaces are one ot the better known brand on the market today. They get high marks for durability and have been around a long time. Consumer Reports ranks it in the top five of all companies.
Why is silicon dioxide used as the layer of furnaces?
Silicon dioxide is used as a layer in furnaces because it acts as an insulator, helping to retain heat and improve energy efficiency. Additionally, it has a high melting point, which allows it to withstand high temperatures in furnaces without degrading. Silicon dioxide also has good chemical stability, making it resistant to reactions with the materials being processed in the furnace.
How many minutes of cooking time from lb propane tank with 4 burners on high?
The cooking time you can get from a 1 lb propane tank with four burners on high depends on the BTU rating of your burners. Typically, a standard propane burner uses about 10,000 to 15,000 BTUs per hour. Since a 1 lb propane tank holds approximately 21,600 BTUs, you could expect about 1.5 to 2 hours of cooking time with all four burners on high, translating to roughly 90 to 120 minutes. However, actual cooking time may vary based on burner efficiency and usage.
How the open hearth process became obsolete?
Because of small termal efficiency, high prices of oil, long duration of process,.... Today steel is mainly made by electric arc furnace and by converters. Converters use only oxygen for refining blast furnace iron. Electric arc furnaces can melt scrap steel much faster than in the old open hearth furnaces. Much of disadvantages of open hearth furnaces are solved in electric arc furnaces and converters. Open hearth furnaces can't melt high quality alloy steels, but they can melt very good quality construction steels. They are still in use by Russians about 30% and Ukrainians 50% and other former soviet countries. The open hearth furnaces was more then a century the symbol of a steel making.
I recently saw a commercal on TV about fat burners, what are fat burners side effects that I should be aware of?
It depends on which TV fat burner you were watching. For the most part fat burners are high in caffeine. Caffeine's major side effect is an increased heart rate. Always check with a doctor before using any fat burner.
What source of energy can melt down iron ore?
Iron ore is typically melted down using high-temperature heat sources such as blast furnaces, electric arc furnaces, or induction furnaces. These sources of energy provide the intense heat necessary to melt the iron ore and separate the metal from impurities.
How many burners in a 70000 btu furnace?
The number of burners in a 70,000 BTU furnace can vary depending on the design and manufacturer. Typically, a mid-efficiency residential furnace may have between 2 to 5 burners to achieve that BTU output. High-efficiency models may use fewer burners due to more advanced technology and better heat exchange efficiency. It's best to consult the specific furnace's specifications for accurate information.
How much current does the GE JP389 Electric Cooktop pull with all four burners on high I am concerned about compatibility with the older style wiring in our home.?
The GE JP389 Electric Cooktop pulls quite a bit of current with all 4 burners on high. If you have concerns about the wiring in your house you should contact an electrician to make sure it is safe.
