0
The DLP Samsung TV is powered by a lamp in the back of the TV. The lamp is what gives you a crisp, clear picture. If you notice your picture quality beginning to fade it is time to replace the lamp unit in the back of the TV. It is a simple task and you can avoid paying a repair man if you follow the steps below. It is recommended that you change your lamp every two to three years.
Step 1. Find the lamp code sticker. It can be located on the back right panel of your Samsung TV. On this sticker you will find the lamp type and code information needed when you purchase your Samsung replacement lamp bulb.
Step 2. Make sure that no power is getting to your TV. To ensure this unplug the unit from the electrical outlet. Never just assume if the product is turned off that power is not getting to it. So safety first, unplug. Allow the TV to cool between 30 minutes to a hour. That way the lamp bulb isn't hot when you go to replace it.
Step 3. Find the lamp cover on the Samsung TV. You can locate it on the lower right on the back panel. Unscrew all screws that hold the cover in place. There will be anywhere between 4 to 6 screws to unscrew. Put the screws in a place that you will not loose them. If you are still unsure at this point on where the location of the lamp cover is consult your owners manual for the Samsung TV.
Step 4. Slide the lamp cover from the back panel. With the screws out now, it will slide easily.
Step 5. There are some screws holding the lamp in place. Locate them and unscrew them. Once that is done you will be able to carefully pull the old lamp out. The lamp bulb comes as a unit and will be replaced as a unit.
Step 6. Put the new Samsung replacement lamp in the same place that you took the old one out. Next screw all the screws in that secure the lamp in place. Then put on the lamp cover and screw in those screws.
What else can I help you with?
How do you replace license plate bulb on a 2000 dodge neon?
== # Remove screws attaching license plate lamp to rear bumper # Remove lamp from bumper. # Remove bulb socket from lamp. # Pull bulb from socket. == # Install bulb into socket. # Install bulb socket into lamp. # Place lamp in position. # Install screws attaching license plate lamp to rear bumper.
Buying a Samsung Lamp Bulb for Brighter Vision?
Samsung television sets are popular for their quality vision and sound. A lot of times, however, the bulb in a Samsung television will go bad. Many people do not notice this subtle change in lighting on their television set. By simply going ahead and replacing the Samsung lamp bulb, you can dramatically improve the vision of your television. Your television set will project an image that is just like new with a brand new lamp bulb. The typical lamp bulb is not expensive. They range in prices from $50 to $100. Online, you can typically find a bulb for $70.
Does Best Buy sell Samsung lamps?
The only lamps that Samsung makes are replacement lamps for their products. Best Buy does not sell Samsung replacment lamps, but you can find Samsung lamps on Amazon.com. http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=samsung+lamp&x=0&y=0
How do you change the license plate light on a 1994 camaro?
Remove two rear lamp bolt/screws from rear license lamp. Remove lacense lamp from rear bumper fascia. Remove license lamp bulb and socket from rear license lamp. Replace bulb and install using reverse procedure.
How do you install tail light bulb Chevy Cobalt 2006?
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
How can I perform a 3 way lamp socket replacement?
To perform a 3-way lamp socket replacement, first unplug the lamp and remove the shade and light bulb. Unscrew the socket from the lamp base and disconnect the wires. Install the new socket by connecting the wires and screwing it into place. Test the lamp with a new bulb to ensure it is working properly.
What is another word for light bulb?
Incandescent lamp
How do you replace the headlight bulb located on a Nissan Pathfinder?
for the halogen bulb from the inside turn the retaining ring counter clockwise and pull bulb out, install bulb in socket and reinstall into lamp, then turn retaining ring clockwise.
What is the function of a Samsung lamp?
The function of a Samsung lamp is its' ability to provide lighting to a room or specified area. You plug the Samsung lamp in and use accordingly. Many of these may also be battery operated.
Change License plate bulb Ford F150?
Replacing license plate lamp bulbsThe license plate bulbs are locatedbehind the rear bumper. To changethe license plate lamp bulbs:1. Reach behind the rear bumper tolocate the bulb.2. Twist the bulb socketcounterclockwise and carefully pullto remove it from the lampassembly.3. Pull out the old bulb from thesocket and push in the new bulb.4. Install the bulb socket in lamp assembly by turning it clockwise.
Difference between a lamp and a bulb?
A lamp refers to the entire lighting fixture that holds the bulb and provides light, while a bulb is the actual light-emitting component that fits inside the lamp and produces light when powered. In other words, the bulb is the source of light, while the lamp is the structure that houses and supports the bulb.
What subsystems are in a lamp?
A subsystem for a lamp would be the bulb because the bulb lets the eye see.
