0
1) The first and the most important step is to shut off the gas that is running to the heater. Most heaters have a valve between the gas line and the heater that shuts off the gas. Allow the heater to completely cool before attempting any of the following steps.
2) Remove the front of the heater, which is usually a grid made of either metal or glass. The grid is held to the heater by a pair of screws that are either along the bottom edge or the sides of the heater. As with all the parts of the heater, clean the grid before reattaching it later.
3) The main burner for the heater should be immediately behind the grid. The burner is usually a stainless steel round or oval bar that runs side-to-side inside the heater. The bar has holes in the top where the gas flames appear when the heater is turned on. Using a six-inch adjustable wrench and a pair of channel lock pliers, remove the burner from its mount inside the heater. There should be some brass grips or fittings on one side of the burner mount. After loosening them with the wrench and pliers, slide the burner out of the mount.
4) Do not slide the burner completely out of the heater, as the pipes connecting it to the gas line will break. The pilot light should not have to be removed as long as the burner is slid too far out. Take a bristled brass brush, and buff the edges of the holes and inside the holes along the burner. Next, take a vacuum cleaner and vacuum the holes as far as the hose can reach. Go over the burner very thoroughly when vacuuming, as any leftover dirt will lead to problems when reactivating the furnace.
5) Finally, place the burner back in the heater and re-slide it into the mount. Take care that the brass fittings are all fitted tightly to the burner. Take a wet cloth and wipe down the burner, the ignition assembly and the pilot light. Re-fit the grid on the front of the heater and screw it back into place.
What else can I help you with?
What are the benefits of using a wall gas heater in a home?
A wall gas heater provides efficient heating, saves space, and is cost-effective compared to other heating options.
What are the key features and benefits of the Cadet wall heater?
The key features of the Cadet wall heater include efficient heating, adjustable thermostat, and a compact design. The benefits of this heater are quick and even heating, energy savings, and space-saving installation on the wall.
What are the benefits of using a wall heater in a small room?
A wall heater in a small room provides efficient heating, saves space, and can be cost-effective compared to central heating systems.
What are the benefits of using a wall electric heater in a small room?
A wall electric heater in a small room provides quick and efficient heating, saves space, and can be easily controlled for personalized comfort.
What are the benefits of using a wall air conditioner heater in a small room?
A wall air conditioner heater in a small room provides both cooling and heating functions, saving space and money compared to separate units. It offers efficient temperature control, is easy to install, and can be more energy-efficient than other heating and cooling options.
What are the benefits of using a wall space heater in a small room?
A wall space heater in a small room can provide efficient heating, save space, and be cost-effective compared to central heating systems.
What are the key features and benefits of the Honeywell wall heater?
The key features of the Honeywell wall heater include adjustable thermostat settings, multiple heat settings, and a compact design. The benefits of this heater are efficient heating, easy installation, and a reliable brand reputation.
Is a direct vent water heater as good as a standard vent water heater?
a direct vent water heater is more fuel efficient (cost's less to operate). aside from that there isn't much difference, aside from not needing a double wall flue through the roof on a standard gas water heater.
How to install a wall heater?
To install a wall heater, first choose a suitable location on the wall. Make sure there is proper clearance around the heater. Next, mount the heater on the wall using the provided hardware. Connect the heater to the electrical supply following the manufacturer's instructions. Finally, test the heater to ensure it is working properly and safely.
What are the benefits of installing a wall-mounted AC and heater in a room?
Installing a wall-mounted AC and heater in a room provides efficient heating and cooling, saves space, improves air quality, and offers precise temperature control.
What are the benefits of installing a wall mount gas heater in your home?
Installing a wall mount gas heater in your home can provide efficient heating, cost savings on energy bills, and a space-saving solution compared to traditional heating systems.
What are the advantages of an electric wall heater?
Electric wall heaters are an excellent source of heat for your home, office or garage. They are out of the way because you can install them on walls and they provide efficient heating.
