0
Gone are the days of cassette tape players. CD`s and CD players are still widely available for use in vehicles, homes and portable players however Mp3 players are convenient player replacements that you can virtually take anywhere. Follow these steps to guide you through the connection process for your Mp3 player and car stereo.
• Step 1: Reference you Mp3 and vehicle stereo manuals. If your vehicle is newer it most likely has a connection auxiliary jack already installed for your Mp3 player. Other vehicles can still be considered for connection.
• Step 2: Purchase radio electronic equipment at a suitable electronics store. Buying online may void the manufacturer warranty. Equipment you may need could be a FM transmitter, stereo cable, RCA cord and if you have an older car stereo possible a cassette adapter. Consult the authorized staff at your local electronics store for specific requirements.
• Step 3: Connect the Mp3 player to your car stereo system. If you use a RCA cord, you will need to remove the stereo from the console and plug the cable into the back jacks and the other cord end to the player. Using a cassette adapter is simple. Connect the end to the player and insert the cassette adapter into the stereo. Using a FM transmitter, plug the cord into the headphone jack, turn your stereo on and tune both to the FM channel designated.
• Step 4: Consider an additional power source. Mp3 players and adapters will drain battery power. One option is to use an Mp3 docking station that connects to the charge port in your vehicle. This will charge the player while playing.
Mp3 players have wonderful enhancements over previous music technology allowing convenience to consumers. Referencing your Mp3 and stereo manuals; researching connectors and adapters available for purchase will help you make an informed decision on the purchase of connection equipment. With the right equipment you will be able to relax and enjoy your favorite songs off your Mp3 player anywhere you go.
What else can I help you with?
What is the most likely cause for my car stereo to only work sporadically?
Bad wiring connection or internal wiring connection in the stereo
How do I connect my computer's audio to my stereo?
You sound card should have a audio in port.
Is there a stereo system that allows me to use my MP3 player and has a turntable?
The Numark PT01USB Portable DJ Turntable with USB Connection is what you need.
How do you install a stereo in a 1995 Buick Lesabre OR A WIRING DIAGRAM?
Connect the wiring harness to the back of your 1995 Buick LeSabre stereo. Secure the stereo with the stereo retaining screws.
What is the difference between a boombox and a stereo?
A boombox is a portable stereo; so a stereo is portable and a boombox is not.
Who invented the personal stereo?
The personal stereo is also known as a Walkman. This portable personal stereo player was invented by Andreas Pavel.
How do you hook an mp3 player to a Daewoo agc-3106va car stereo?
To connect an MP3 player to a Daewoo AGC-3106VA car stereo, you can use an auxiliary input if your stereo has one. Simply plug a 3.5mm audio cable into the headphone jack of your MP3 player and the other end into the AUX input of the stereo. If there is no AUX input, consider using an FM transmitter that connects to the MP3 player and broadcasts to an unused FM frequency on the stereo. Ensure to set the stereo to the appropriate mode to hear the audio from the MP3 player.
What is the full form a2dp in mobile?
A2DP is an "audio profile" which can be used with bluetooth, it basically allows stereo sound to be transmitted between devices. In other words, if you have a bluetooth speaker system with A2DP & a cell phone with A2DP you would be able to send music, in stereo, from the cell phone to the speaker system.
How do you install a CD player in a 97 Mitsubishi Galant?
Slide the shifter back in place when the car is turned off. Disconnect the negative cable of the battery and secure it from any contact with metallic parts. Open the CD slot and you find two bolts holding the stereo in place. Remove the bolts and pull out the stereo.
What is a good stereo receiver that has iPod connection?
the BOSE Sound Dock. Avail @ Sams Club.
How do you change a in line fuse stereo 4 gauge wire?
To change an in-line fuse in a stereo 4-gauge wire, first disconnect the wire from the power source. Locate the existing fuse holder, open it to access the fuse, replace the fuse with a new one of the same rating, and close the holder securely. Reconnect the wire to the power source and ensure the connection is secure.
Can a fuse be bad if the stereo works but the CD player doesn't work?
Not if the CD player is an integral part of the stereo. If it is a separate component then it may have a different fuse circuit.
