form_title=Metal Siding Repair form_header=9863 Please describe any symptoms that are visible*= [] "Leak through the wall or into the basement [] Siding panel is loose or hanging out of position [] Siding panel is has blown off [] Siding is dented [] Siding color has faded [] Color is blistering/peeling [] Need repair/replacement of soffits, fascia or other trim [] Other"
form_title= Metal Siding form_header= Protect your home from all types of weather with metal siding. What type of siding is currently on your home?*= _ [50] Do you need a professional to install the siding? *= () Yes () No Do you also need a new roof?*= () Yes () No
form_title=Metal Siding Installation form_header=9853 Which type of siding does your home currently have?*= () Wood () Aluminum () Vinyl () Stucco () Other () Don't know Please specify how many stories there are in your home.*= {Select One,One story,Two stories,Three stories or more} How would you categorize this project?*= () Replace existing siding () Siding for a new addition () Repair section(s) of siding () Siding for a new home
This depends on where the location of the siding if it near a crease you may not be able to repair it, however if it is a crack then you can repair it.
To effectively repair aluminum siding on your house, start by cleaning the damaged area thoroughly. Next, use a metal primer to prepare the surface for painting. Then, apply a coat of exterior paint that matches the color of your siding. If the damage is extensive, consider replacing the damaged panels with new ones.
Yes: American Roof & Siding is a Local Siding Company in Houston Tx Offering Vinyl Siding, Metal Siding, Hardie Siding, LP Smart Siding.
form_title=Siding Installation form_header=11113 How would you categorize this project?*= () Replace existing siding () Siding for a new addition () Repair section(s) of siding () Siding for a new home Which type of siding will be installed or repaired on the structure?*= () Wood or Fiber-Cement () Traditional Stucco () Vinyl () Synthetic Stucco () Brick or Stone () Liquid (Spray-On) () Metal (Steel or Aluminum) Please specify how many stories there are in your home.*= {Select One,One story,Two stories,Three stories or more}
To effectively repair aluminum siding, start by cleaning the damaged area and removing any rust or debris. Use a metal primer to treat the surface before applying a coat of matching paint. Cut a piece of new aluminum siding to fit the damaged area and secure it in place using screws or nails. Finally, seal the edges with caulk to prevent water damage.
Metal is more durable, that is a major benefit versus cedar siding. However, metal is more expensive but may be good in the long run. Check in your local Home Depot for your options and budget range.
form_title=Liquid Spray Siding form_header=9713 Why are you interested in liquid siding for this project? (Select all that apply)*= [] Weatherproofing [] Fill & repair cracks [] Prevent fading [] Ease of maintenance [] Reduce frequency of painting [] Environmentally safe Please specify how many stories there are in your home.*= () One story () Two story () Three stories or more What kind of surface do you plan to cover with liquid siding?*= () Stucco () Masonry (brick/stone) () Metal () Wood siding () Concrete block () Vinyl siding () Aluminum/Steel siding () Asbestos shingles
Metal siding works best on a barn or some type of storage shed. It is not a very popular choice for homes because of storms and the sound that rain would make. If you must have metal siding installed on your home, you need to be sure there is good insulation between the siding and the home itself. Metal is not a very good conductor of heat, so in the winter the home would get colder than a home with vinyl siding.
One type of siding that deters woodpeckers is metal siding, such as aluminum or steel. Woodpeckers are less likely to peck on metal surfaces due to the hardness and lack of insects within the material. Another option is fiber cement siding, which is also unappealing to woodpeckers due to its durability and lack of insects. Additionally, vinyl siding can be a deterrent as it is smooth and offers no insects for the birds to feed on.
To effectively cut metal siding, use a circular saw with a metal-cutting blade or tin snips for smaller cuts. Make sure to wear safety goggles and gloves, and measure and mark the cutting line before starting. Cut slowly and steadily to avoid damaging the siding.