Minimally invasive hip replacement is a technique used to perform hip replacement surgeries with a smaller surgical cut. Also, fewer muscles around the hip are cut or detached.
Alternative NamesSmall incision total hip replacement; Anterior hip replacement
DescriptionTo learn about the basic steps of hip replacement surgery, see: Hip replacement surgery.
A surgical cut will be made on the back of the hip (over the buttock), the front of the hip (near the groin), or the side of the hip.
The cut will most likely be 3 - 6 inches long. In a regular hip replacement surgery, the cut is 10 to 12 inches long.
The surgeon will use special instruments to work through the small cut.
Surgery still involves cutting and removing bone. The surgeon still needs to move some muscles and other tissues, although less than with regular surgery. Muscles are usually not cut or detached with a minimally invasive hip replacement.
The same implants that are used in regular hip replacements are also used in this procedure.
IndicationsDoctors perform minimally invasive hip replacement surgery for the same reasons as they perform regular hip replacement surgery. People who are younger and thinner are usually the best candidates for this technique.
Minimally invasive techniques are changing quickly. The hope is that they will allow for a quicker recovery from hip replacement surgery, and patients will have less pain afterwards.
Talk with your surgeon about the benefits and risks. Ask whether your surgeon has experience performing minimally invasive surgery.
Expectations after surgeryThere is often less blood loss and pain with this technique than with open surgery. People who have this surgery usually stay in the hospital for fewer days. They may have a faster recovery.
However, research has shown there may be more complications with minimally invasive hip replacement surgery than with regular surgery. Ask your doctor whether you are a candidate for this procedure. Also ask about complications.
ReferencesMeneghini RM, Smits SA, Swinford RR, Bahamonde RE. A randomized, prospective study of 3 minimally invasive surgical approaches in total hip arthroplasty: comprehensive gait analysis. J Arthroplasty. 2008;23:68-73.
Harkess JW. Arthroplasty of the hip. In: Canale ST, Beatty JH, eds. Campbell's Operative Orthopaedics. 11th ed. Philadelphia, Pa: Mosby Elsevier; 2007:chap 7.
Reviewed ByReview Date: 08/12/2011
C. Benjamin Ma, MD, Assistant Professor, Chief, Sports Medicine and Shoulder Service, UCSF Department of Orthopaedic Surgery, and Linda J. Vorvick, MD, Medical Director, MEDEX Northwest Division of Physician Assistant Studies, University of Washington, School of Medicine. Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.
The latest and most lauded advances and improvements in hip surgery procedures is the use of minimally invasive techniques. These techniques include incisions that disturb fewer of the muscles and tissues and replacements made of ceramic which are more resistant to wear,
a standard procedure for hip replacement; a newer technique known as minimally invasive surgery (MIS), pioneered in Chicago in February 2001; and revision surgery, which is done to replace a loosened or damaged prosthesis.
One can go getting any information about hip surgery in any local hospital, asking a doctor will defenetely be a good idea, otherwise navigating in the internet about this will also help.
Hip resurfacing or total hip replacement
Hip Surgery Procedures Conventional hip replacement surgery is a procedure that includes incisions determined by physical size. The muscles around the hip joint are detached, the ball joint of the hip removed, and replaced with a prosthesis or artificial joint. The artificial joint will be attached to the thighbone using special materials that allow bone to reattach to the new joint or by using a cement-like product. The surgeon then removes damaged cartilage and attaches a replacement socket to the hipbone. The new ball of the thighbone is inserted into the socket portion of the hip. The surgeon will then reattach severed muscles and close the incision. This procedure usually requires an incision from 8 to 10 inches long along the side of the hip. Minimally invasive surgery involves a one or two incision technique where the length of the incisions are half those that are commonly used for the conventional hip replacement surgeries. The one-incision surgical technique is commonly used for procedures that require less bone removal and involves an incision roughly 4 to 5 inches long. This incision is made either in the front or back of the hip. Other than the size of the incision, the technique for the actual replacement of the ball joint is the same as that in the conventional surgery. The two-inch surgical procedure involves making two incisions that usually don' exceed 2 1/2 inches in length. One incision provides access from the front of the hip to place the prosthesis, while another small incision is made to the back of the hip to facilitate placement of the ball component. This procedure also eliminates the need to cut through muscles and tendons. This surgical technique comes with a higher rate of complications, so while minimally invasive, does has its drawbacks. Hip resurfacing is a technique that replaces worn surfaces on the hip joint. Nothing is removed. This technique requires less bone to be removed than that involved in a hip replacement, and caters to physically active patients as well as those who are younger, with good bone health.
Hip Replacement or hip arthroplasty is a surgical procedure to treat the damaged portion of the hip. A person who performs this procedure by making certain incisions to remove the damaged part of the hip and replacing them with prosthetic implants is a Hip Replacement surgeon.
If you need a hip replacement, then age is not an issue.
blood plasma donation after total hip replacement
Hip replacements can be both. But a revision is simply when they have to re-operate, or revise an exisiting hip replacement, often by putting a new one in.
A replacement hip should not be squeaking. Contact your surgeon regarding this. There may be a recall on the replacement hip, or there may be a more simple solution. Do not assume that this is normal.
Hip arthroplasty is a hip replacement. Arthropathy is any joint disease.
Exactly what it sounds like. A hip bone is taken out, through surgery of course, and then is replaced with a prostetic. My mom's 'new' hip is made of titanium. ----------------------------------------------------------------------------------------------------- A bone conserving alternative to a Total Hip Replacement (THR) is hip resurfacing. The Birmingham Hip Resurfacing (BHR) is a bone conserving implant aimed at young active patients who want there quality of life back! Instead of replacing the old worn out joint, a BHR resurfaces the femoral head with a Cobalt-Chrome component and inserts a Cobalt-Chrome cup into the acetabular socket. This metal on metal technique last longer and has less wear than the traditional Metal on Plastic THR. By conserving the bone at the femoral head, revisions should they be needed are much simplier than they are if a THR has been carried out at first. The BHR was pioneered by Derek McMinn in Birmingham, UK. The implant has a high success rate currently at 97% at 13 years which compared to similar statistics for a THR, the difference is staggering. See McMinn Centre website for more details!