0
Some homeowners think that there is a deep secret knowledge required to install laminate flooring. Well, there isn’t! It is quite straightforward and actually easy. Laminate floors are a type of wood product that is a mix of wood fibers and plastic coatings pressed together and glued with a resilient bonding material. It will provide years of worry-free service even to abused floors. Of course, there are varying thicknesses and types of laminate flooring that may be more suited to one application or another, but they all install rather easily.
The individual laminate strips interlock to form the overall floor covering. They lock at the seams and are prevented from sliding where they terminate against the walls. Usually there is a quarter-round trim at baseboard level of old vinyl and other tile floors being replaced, or tack strips that have to be removed if carpeting was the prior floor covering material. Clear the floor surface of any popped up nail heads and fill low spots with floor filler.
Be sure when it come time to install laminate flooring that either water proof or water resistant laminate has been correctly picked for the location. If the dog occasionally urinates on the floor, heavy wet mopping is expected, or if installed in a bathroom, then waterproof is the better choice. In all case install an underlayment. Some laminate floors already have an underlayment backing. Other laminate flooring materials require an additional purchase of rolls of underlayment. When deciding to install laminate flooring, the underlayment will prevent noise of the free-floating floor moving against the subfloor. The noise of floors without underlayment is loud and heard with every step.
Roll out the underlayment and start in one corner, putting in place a strip of laminate flooring. Install laminate flooring in a way where seams overlap a solid piece. Think of a brickwork pattern. Go all the way to the edge of the wall snapping each next piece in place against the seam of the last. The final laminate strips that are installed may have to be ripped along their lengths in order to be able to cover the seams with new quarter-round or other trim material. Slightly lifting the prior course of strips next to the last row will make it easier to snap the last row into place.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How much would it cost to replace the floor in a house?
It solely depends on the square footage you wish to replace and the type of flooring you wish to install, and whether you're doing it yourself or hiring a contractor
How you replace a vinyl floor that has glued to the underlayment?
if the old floor is down good and tight, you can go right over it. If it has a strong embossed pattern it may telegraph through the new floor though. you can skim coat over that if you need to.
can i get money to help me replace my floor in my kitchen that is rotten. I am on disability. ?
can i get money to help me replace my rotten kitchen floor. i am on disability.
Would the clutch pedal going to the floor and staying on the floor be just the clutch going out or what could it be if so and how do you replace the clutch on a 2001 Maxima?
You should not attempt to replace the clutch yourself unless you have considerable mechanical skills. In this case, the problem is most likely that the spring holding the clutch pedal in place is broken.
How do you replace the floor in a 1987 Pontiac trans am Should it be rivited or welded in What type of welding is best Should the new floor overlap the old floor Other information would be appreciate?
The old floor should be cut out. Preferably with a plasma cutter. The new floor should be welded in. It would probably be best to leave some overlap, flange it and then spot or rosette weld the new floor to the overlap flanges.
How to replace shower floor?
Get a professional to do it.
How do you replace the floor in your bass boat?
Pretty vague question, but if you can, laminate a new surface to the old one. If not, rip it out and put in a new one. never laminate to the old one this adds weight you already have extra weight from the rooten floor. remove old floor careful not to damage the stringers under the floor 3/4 plywood marine grade a-b screw only to the stringer glass in the sides
How long does it take to replace a tran 74 Monte Carlo?
take the old out and install a new one about 4 hours on a garage floor.
What is the meaning of painted yourself into a courner?
Getting yourself into a difficult situation that is hard to get out of. It comes from when you paint a floor, you should always paint towards the door so that you can get out. If you painted yourself into a corner, to get out you would have to step on the floor which may still be wet. If you did not want to ruin the floor you would have to stay there until the floor dries. So if you do something that gets you into a difficult situation you can be said to have painted yourself into a corner.
What happens to the old ocean floor as the sea floor spreads?
As the sea floor spreads, the old ocean floor gets pushed out, which makes the plates move.
How do you Replace a toilet after you tile the floor?
With a deep floor flange Or a wax seal with a horn and extra long Brass floor flange bolts
How does a floor dry out after mopping?
By evaporation, if you don't dry it yourself
