Typical Electronic Garage Door Parts

Answer 1

There are several pieces of electronic garage door parts, and all of them play a vital role in bringing the door up or down. Each part needs to be installed properly for the door to work. If you are planning to install or replace an electronic garage door, make sure you put together all of the garage door parts before you test the door.

The Heavy Lifting Gear

Most electronic garage doors include a mechanical opener that is mounted in the center of the garage ceiling. This is the most important of the garage door parts, because it powers the pulleys that lift and close the door itself. Since most garages have lights installed in the ceilings, you can use the wires that power the light to hook up the electronic garage door motor and give it plenty of power to operate. Most garage door motors are equipped with lights that turn on when you activate the door, so you don’t have to worry about using the light socket to power the motor.

Remote Operation Devices

The most convenient electronic garage door parts aren’t actually connected to the garage door itself. The remote controls give you the ability to open and close the garage door from anywhere in the vicinity. Most people mount the remote control in their vehicle so that they can open the door as they pull into the driveway. When you install your garage door, make sure that the motor is set to the same frequency as the remote control.

Safety Mechanisms

Some of the garage door parts are designed to prevent the door from closing on an item or a person. Garage door sensors can be installed on either side of the door, about 6 from the ground. The sensors send a light signal to one another across the base of the door. If the door is open and the sensors can’t read the light from one another, the door will not be allowed to close. When there is nothing blocking the sensors, the door will close completely. The sensors need to be aligned exactly so that they are always able to read one another properly.