0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are differences between steel 52 and steel 37?
the difference is the max load which the material will withstand until failure 52 stands more than 37
What happened to the ultimate tensile and yield strength of most of the metals when temp falls?
building will collapse due to steel failure
What is strain to failure?
strain-to-failure
How does D2 toolsteel compare to S7 tool steel?
D2 tool steel is a steel, tool steel. For cold rolled steel, D2.
Who is more costly mild steel or stainless steel?
stainless steel
The fatigue strength of mild steel is?
The fatigue strength of mild steel refers to the certain conditions whereby the mild steel suffers fatigue failure.
What are differences between steel 52 and steel 37?
the difference is the max load which the material will withstand until failure 52 stands more than 37
Steel cranes can carry heavy steel beams thousands of feet high during skyscraper construction. This is an example of?
The evolution of building techniques:apex
What is the Difference between the Upper and lower yield stress in mild steel?
Lower YS is that point at which the steel flows elastically and failure takes place at upper YS.
What is stronger stainless steel or cold steel?
Depends on type and temperature range. Generally cold drawn steel is stonger in the drawing direction, but if it's a very cold or very hot application then stainless steel is a good choice. Technically I think CS that is very cold would make it stronger, but very brittle so any minor pertubations will cause failure, and failure will occur with no deformation warning.
What has the author L Rotherham written?
L. Rotherham has written: 'A discussion on damage and failure mechanisms of heavy steel'
Is it o.k. to use carbon steel pipe with brass valves?
There are instances when corrosion occurs at the junction of a carbon steel pipe and a brass valve. This is often the result of a pipe threading failure.
What happened to the ultimate tensile and yield strength of most of the metals when temp falls?
building will collapse due to steel failure
What is an under reinforced beam?
Under reinforced is that in which provided steel ratio is less than balanced steel ratio. Concrete beams are designed as under reinforced beams. The reason is that the failure start by yielding of steel instead of crushing of concrete. Mian Yaqoob
Is mild steel ductile at room teperature?
Yes, it is - it has a yield point and can strain quite a bit 20% or so before failure
Can a 4 inch steel pipe handle a 50000 pound axial load?
Steel has a crush strength of 95,000 psi and a tensile strength of 55,000 psi. A Sch. 80 - 4" steel pipe has a cross-sectional area (of steel) of 4.407 sq. in. This can handle a load in tension of ~242,000 pounds before failure. And a load in compression of ~ 418,000 pounds before failure. 50,000 pounds is well within the factor of safety for both loads in tension or in compression, provided there are no shear forces applied.
What is meant by reinforcement?
A reinforced concrete is a one in which steel is used. The inclusion of steel in concrete is to take up the tensile forces, since concrete is weak in tension and strong in compression. Moreover it gives warning of the structure before failure.
