When you get a rim piercing (through cartilage) both sides of the ear (and any jewelry) are visible, so you want something without a "wrong" side. Choose a small hoop with a ball closure, a labret stud, or a barbell with two decorative ends. Many styles are available, from fun and funky to don't-mess-with-me scary!
That depends on what kind of rim and the damage done to it? If the rim is steel, and the rim is merely cracked, yes it can be fixed. You would weld the crack closed. If the rim is bend, and the dent is not on the bead (place where the tire meets the rim) but ont he outside lip, you can simply sledge it back to place. If the rim has a flat spot, then the rim should be fixed by a professional to get it trued. If the rim is aluminum, everything changes. If there are minor scratches, you can get the rim resurfaced and the rim will be fine. After that, any other kind of damage is either irrepairable, or would most likely cost more than a new rim. Best thing to do, if it is an aluminum stock rim, is go to your local scrap yard and find a vehicle with one on it. You can even go to your local Costco tire shop(yes, Costco). They have a listing of a local wheel shop which can try to order your rim.
Rim tape should be replaced when it is worn out, damaged, or no longer providing adequate protection for the inner tube against the spoke holes in the rim.
To determine the correct size rim tape for your bicycle wheel, measure the inner width of the rim. The rim tape should be slightly wider than the inner width of the rim to ensure proper coverage and protection.
aim at the front of the rim or a bit in front of the rim
He should see a doctor.
it should fit but it will be kind of ballooned out since its 2 inches wider and as long as you have the clearance on whatever the wheel goes to you should be fine but both wheels are 8 inch diameter,maybe you get lucky and the rim is 7 or 7.5 wide but either way it should fit fine
yes any kind of spider whold do that
To determine the width of rim tape needed for your bicycle wheel, measure the inner width of the rim. The rim tape should be slightly wider than the inner width of the rim to ensure proper coverage and protection.
If you have a slightly bent rim on your car, you should have it inspected by a professional mechanic or auto shop. They can assess the extent of the damage and recommend whether the rim can be repaired or if it needs to be replaced. Driving with a bent rim can affect your car's performance and safety, so it's important to address the issue promptly.
If you have a dented rim on your car, you should consider getting it repaired or replaced by a professional auto mechanic or a specialized wheel repair shop. Driving with a dented rim can potentially cause further damage to your car and compromise your safety on the road.
If you look on the inside of the drivers door by the door latch you will see the size tire it should have, the make of tire I don't know.
If you have a dent in your rim, it is important to have it inspected by a professional mechanic or auto body shop. They can assess the extent of the damage and determine if the rim can be repaired or if it needs to be replaced. Driving with a damaged rim can be dangerous and may cause further damage to your vehicle.