try moving the wires inbetween the door and the body of the car to see if it is not touching your welcone.
replace master panel switch or check motors
If none of them are working then you could have a master switch or relay defective.
sounds like you need to replace power window master switch
Power windows are protected by a circuit breaker. So you would have to have a bad relay ,the master switch is defective or you have a broken wire where the door opens.
remove master switch from door. remove wire harness from back of switch. with a jumper wire brige wires until window raises. then buy new master switch and replace
NO.
master boot record
test your window master swithc, this is the switch that controls all window from the one panel
if the master switch is broken none of your windows or locks will work you can find one at a local auto wreckers
If you plan to install windows 2003 server domain controllers into an existing windows 2000 domain or upgrade a windows 2000 domain controllers to windows server 2003, you first need to run the Adprep.exe utility on the windows 2000 domain controllers currently holding the schema master and infrastructure master roles. The adprep / forestprer command must first be issued on the windows 2000 server holding schema master role in the forest root doman to prepare the existing schema to support windows 2003 active directory. The adprep /domainprep command must be issued on the sever holding the infrastructure master role in the domain where 2000 server will be deployed
Gold Print Master
Windows 9x/ME = fdisk /mbr Windows 2000/XP = Fixmbr
i would first check to see if power window master switch is good usually if more than one window doesnt work, that's where the problem isfords also have a lock on the master switch for windows other than driver window. check that is not engaged