answersLogoWhite

0

To calculate the weight of a 1200x2400 mm sheet of 11 mm OSB (Oriented Strand Board), first, determine the volume: 1.2 m x 2.4 m x 0.011 m = 0.03168 cubic meters. OSB typically weighs around 600 kg per cubic meter. Therefore, the weight of the sheet is approximately 19 kg (0.03168 m³ x 600 kg/m³).

User Avatar

AnswerBot

5d ago

What else can I help you with?

Continue Learning about Accounting
Related Questions

What is the weight of a 1200x2400 sheet of 9mm OSB?

The weight of a 1200x2400 sheet of 9mm OSB (oriented strand board) is approximately 19.3 kg. This calculation is based on the density of OSB, which is about 600 kg/m^3.


Weight of 4'x8'x716 sheet of osb plywood?

I NEED THE WEIGHT OF 7/16 OSB PLYWOOD One sheet will weight 47 lbs.price


What does a sheet of 12 osb weight?

A sheet of 12mm OSB (oriented strand board) typically weighs around 52-56 pounds. However, the weight can vary depending on the specific dimensions and density of the board.


How much does a sheet of 716x4x8 osb weigh?

Trick question! A single sheet of OSB weighs about 1.5 lbs per sf or 47 lbs, assuing you are asking about 7/16" thick, not 716. One sheet of plywood weighs a bit more. There is no such thing as OSB plywood! That is like asking how much does a motorcycle car cost?


How much does a sheet of 716x4x8 osb plywood weigh?

Trick question! A single sheet of OSB weighs about 1.5 lbs per sf or 47 lbs, assuing you are asking about 7/16" thick, not 716. One sheet of plywood weighs a bit more. There is no such thing as OSB plywood! That is like asking how much does a motorcycle car cost?


How much does a three eighths inch thick sheet of OSB weigh?

3/8" OSB is approximately 1.2 lbs per square foot. A typical 4'x8' sheet, then, would weigh in at slightly under 38.5 lbs.


What is the density of Oriented Strand Board OSB?

A 1/2" sheet of oriented strand board weighs about 52-53 pounds and a 3/4" sheet weighs about 78-80 pounds. It appears that it is not possible to be more precise because the density of the material is not standardized and can vary depending on the moisture content.


How many sheets of 4x8ft OSB sheets to cover 200 square ft?

To cover 200 square feet with 4x8 ft OSB sheets, first calculate the area of one sheet, which is 32 square feet (4 ft x 8 ft). Then, divide the total area to be covered by the area of one sheet: 200 sq ft ÷ 32 sq ft/sheet = 6.25 sheets. Since you can't purchase a fraction of a sheet, you would need 7 sheets to cover the area completely.


What is osb?

Oriented Strand Board Used in place of plywood for roofs and sidewalls. Strips and chips of wood are randomly formed into a sheet with glue and pressed into a sheet. Because the strips are going in different directions and across each other it give the finished sheet it's strength.


Is it normally allowed by code to use OSB to finish attached garage walls that do not share with the house What if there is living space above the garage?

this varies from state to state, but in my opinion any wall or ceiling abutting a living space should have a fire barrier. Maybe there is sheet rock behind the OSB


What is osb board?

OSB stands for oriented strand board. It is made of wood strands and waterproof adhesives. The strength of OSB board is equal to that of plywood.


Where can one purchase an OSB?

If someone wanted to purchase an OSB there are a variety of places where someone can do so. Some of these places are Calibex, Fordaq and cheap osb and nsbe.