Yes the 115 volts you read is just the maximum it will handle.
15000btu is the largest and that's a 115 volt basically the same ,you just need a higher breaker is all
The difference between a 115-volt and a 110-volt air conditioner primarily lies in the nominal voltage ratings, which reflect the voltage range that appliances can operate within. While 110 volts is often used as a general reference, many modern air conditioners are designed to operate optimally at 115 volts, which can better accommodate fluctuations in power supply. In practical terms, both types are compatible with standard household electrical systems in North America, and the difference is largely a matter of labeling rather than performance.
yes
If it is a 240 volt conditioner it will stop. If it is a 120 volt conditioner it will stop if it is on the leg that has been lost.
If you are about to purchase a window unit, the answer depends on a few factors: 110/115/120 volt units are generally not available in the larger cooling capacity sizes. If you need to cool one average sized bedroom and have a 110 outlet near a window, this should do the trick, and you won't need an electrician to install new wires. If you need to cool an entire house, then you are going to need a 220/240 volt unit or multiple 110 volt units. If you are talking about a central system, then the furnas, or indoor section will most likely be 110 volt and the outdoor unit 220 and you will need to have it professionally installed anyway.
Yes, a 30 amp circuit can support a 115-volt air conditioner, as long as the air conditioner does not exceed the circuit's capacity. However, it's important to ensure that the air conditioner's amperage draw is within the 30 amp limit. Additionally, verify that the proper type of outlet and plug are used for safe operation. Always consult an electrician if you're unsure about compatibility or installation.
Doesn't sound like a good idea to me.
Usually in the air handler
12 V
A 220 volt window air conditioner typically requires around 1,500 to 2,000 watts of power to operate efficiently.
That depends on the size and application of the unit. An automotive system runs off of 12 volts. In the USA, a household unit is 110 or 220 volt.
The energy requirements for a 120-volt air conditioner depend on its cooling capacity, measured in British Thermal Units (BTUs). A typical 120-volt air conditioner with a cooling capacity of 10,000 BTUs requires around 1,000 watts of power to operate efficiently.