You start out with what kind of an airplane you have. Let's use a very popular airplane, the King Air B200GT. It burns about 660 lbs/hour of fuel to go 300 knots. If you want to fly for two hours, multiply 660 lbs by two hours, and you'll find you need 1320 lbs of fuel to complete the mission. (Since they don't sell it by the pound, divide 1320 by 6.7--what a gallon of fuel weighs--to get a little over 197 gallons, then order 250 gallons in case you have to divert to your alternate airport.
1 gallon of jet fuel weighs 6.79 pounds.
A gallon of jet fuel weighs approximately 6.84 pounds.
About 7 pounds
5 Gallons of Jet A is 30 pounds
The fuel for Jet aircraft, Jet A and Jet A1 is usually sold in weights, this being Kilograms or Pounds.
Jet fuel is measured in pounds because it is a unit of weight that is used to quantify the amount of fuel loaded onto an aircraft for safe operation. By measuring jet fuel in pounds, it allows for accurate calculation of the weight and balance of the aircraft during flight planning and ensures that the aircraft stays within its weight limitations for takeoff and landing.
6.84 pounds per gallon
A barrel of jet fuel typically weighs around 290-310 pounds when full.
There are approximately 298 gallons of jet fuel per metric ton. Jet fuel weighs about 6.7 pounds per gallon. The mass of fuel varies depending on the pressure and temperature.
The cost of jet fuel can vary significantly based on market conditions, location, and time, but as of late 2023, the average price of jet fuel was around $3 to $4 per gallon. Given that there are approximately 6.7 pounds in a gallon, 50,000 pounds of jet fuel would be about 7,462 gallons. At an average price of $3.50 per gallon, the total cost would be approximately $26,100.
There are two main types of jet fuel used for commercial turbine engines. The vast majority of turbine engines use a kerosene type of fuel, labeled Jet A-1 or Jet A. A blended kerosene and gasoline type, considered "wide-cut" and labeled Jet B, is rarely used except in very cold climates. Military jet fuels use variations of these two fuels, with the majority using the kerosene-type jet fuel.- Determine the number of gallons of jet fuel to be weighed.- Select the conversion factor, determined by the type of fuel. For kerosene types of fuel, use 6.76 pounds per U.S. gallon. For wide-cut kerosene types of fuel, use 6.36 pounds per U.S. gallon. If you are uncertain of the fuel type, use the standard kerosene type fuel conversion, since the other type is rarely used.- Multiply the number of gallons by the conversion factor. As an example, a Boeing 747 holds 57,164 gallons of fuel. Multiplying this by 6.76 pounds per gallon gives you the total fuel weight of 386,429 pounds.
its just under 0.5 pounds.