The process of moving air through, combining with, or dissolving in a liquid or other materials that behave like a fluid is known as aeration, aerification, or aeriation.
the most you can probably have in a ten gallon with airation and normal filtration is about 15 to 20
too much oil in the engine will cause of airation and will create too much pressure to your engine and will damage the headgasket.
the process of taking a big heavy roller with spikes in it and rolling it over you lawn this "aerates" the soil and lets water and fertilizers get to the roots, where they are needed most
it means that your sucking air from the bubble stone or curtain or what ever bubbling airation you might have if it is a bubble curtain that spans the entire tank buy a shorter one and place it down from the filter if it is a stone relocate it to the other corner or away from the filter
You don't if you like your sea monkeys. Sea monkeys are a variety of shrimp. They need airation/filtration and good quality water to live happilly. It is best you leave the sea monkeys with friends (someone to look after them) if you are travelling. HTH
If it's working efficiently and has a good aeration pump, in theory you should never have to have it pumped out. In practice, you will possibly need to have it pumped about every 7-8 years. It should be checked annually for flow rate and blockage.
It depends on what type of new flooring smell you are referring to. If you have recently installed 1 piece floors, or glue placed flooring then the answer is airation. If you are talking about recently refinished wood flooring then the only answer is time. I recently refinished hardwood floors in one room. It took about 2 weeks with the window open and the fan on circulating air to completely remove the smell.
Airation in engine oil is perfectly normal, especially if you checked the oil when hot, just after a drive or with the engine running. If you check the oil and its over the full mark and you see bubbles, thats another story, in that case the crankshaft starts to make contact with the oil level and is mixing and airating the oil, turning it to a foam which is not good. In that case you should drain it to optimum level. Good Luck
Airation will speed the process up. You will need a lot of air, the output of a decent size compressor, for example. Other than that just time will take care of it. You could use a chemical fix like de-clor, used for large fish ponds. But, that just adds more chemicals and I don't know about swimming around in that.
Hey there, Could be a couple of things. Keyholes are cichlids and need heated water. So make sure the temp is right and If u don't have a heater, go out and get one asap. The temp from memory should be 26 degrees celcius. Pretty much ur basic tropical temprature or a smidge higher. Otherwise, if he isn't eating, change the food. get a good decent quality food. The more u pay the better and always get ur food from an aquarium or pet store, Never the supermarket or discount shop. He might be having trouble breathng.... If he doesnt have airation, put some in asap. Basic airation setup is an air pump, air hose and air stone. But u should really have a filter too. Also check the PH... Im pretty sure they should be around 6.7 if ur not breeding. And also check ur hardness. If all that doesnt work, give him a decent water change, About 50% take out and replace coz there could be too much ammonia in the water and medicate with a broad spectrum or multi cure... Ur local aquarium should be able to help u out with all the info, and if they cant its time so find a new store lol. Hope that's helped mate. catch! :o)
It mean what you don't what does it mean.
Mean is the average.