There is a special sequence to torque the bolts properly. I would suggest you check in either a factory service manual, a Chilton manual or a Haynes manual to get the proper sequence plus the pattern. There is no way to post the pattern here.
The head bolt torque specifications for a 1983 Chevy Celebrity 4-cylinder engine typically require tightening to 65 ft-lbs in a specific sequence. The torque pattern usually starts from the center and works outward in a crisscross manner to ensure even pressure across the cylinder head. Always refer to a repair manual for the exact sequence and specifications specific to your engine, as variations can exist.
Bolt pattern for what? Nearly everything that has more than one bolt has a bolt pattern. Are you looking for the wheel bolt pattern? Or the torque pattern for say, the intake manifold bolts?
The head bolt torque specs of a 1985 3.8 Ford Ltd. is 50 to 55 ft lbs. This 65 to 71 Nm belongs to a 6-cylinder torque sequence engine.
Bolt pattern for a 1985 GMC Sierra Classic 1500 is 6x5.5 (That is what mine is)
what is the bolt pattern for 1985 el camino
GM's bolt pattern has remained consistant over the years. 5-bolt pattern: 5x4.75" 6-bolt pattern: 6x5.5" 8-bolt pattern: 8x6.5"
Please advise which engine and what year Celebrity you have. It's a 2.8L V6
i belive its 20 Ibs ( and the pattern is a simple criss cross pattern
To change the alternator belt an a 1985 Chevy Celebrity: 1. Loosen the adjuster bolt and the mounting bolt. 2. Move the alternator to release the belt tension and remove the belt. Reverse to reinstall a new belt.
1985 Chevy s10 RWD on 14' factory wheels bolt pattern is 5x4.75 (5x4 3/4) .
Bolt pattern, 1999-2003:- 5x115mmBolt Pattern, 1985-1998:- 5x100mm
5 X 4.75 (120.7) Bolt Pattern.....