0
What else can I help you with?
How do you remove the front transmission mount on a 1993 buick lesabre?
It has 2 nuts in the bottom of the frame and three bolts on the transmission case
How do you remove rusted carriage bolts from a wooded seated metal frame picnic bench?
Just use a bolt cutter. You'll have them off in 2 minutes.
How do you remove the upper control arm bolts on a 71 corvette when they are rusted to the frame. The engine is still in the car and the clearance behind the bolt is minimal?
Torches & burn them off
Has the cracked aluminum bike frame been repaired or replaced?
The cracked aluminum bike frame has been replaced.
Has your cracked bed frame affected the overall stability and safety of your bed?
Yes, a cracked bed frame can compromise the stability and safety of your bed.
Can a cracked dump truck frame be welded?
No
Is there any way to fix rusted frame?
Cut and weld a splice from a donor frame or fabricate a piece to weld in.
Why wont your 1998 12 valve cummins get fuel to the diesel pump?
Bad lift pump, dirty filter, hole rusted in the lines along the frame, rubber hose cracked at the rear of the engine, line broken in module in the fuel tank.
How do you repair the rear window frame the bottom is rusted out?
The best would be to replace the whole frame with an aluminium frame, may be expensive but the frame will most probably outlive the building!!!!
What should I do if my bike frame is cracked?
If your bike frame is cracked, it is important to stop riding it immediately to prevent further damage or injury. Take your bike to a professional bike mechanic or a bike shop to assess the extent of the damage and determine if the frame can be repaired or if it needs to be replaced. It is not safe to continue riding a bike with a cracked frame.
How do you get the frame bolts out to?
Crossbow? Plum
Doughboy above ground swimming pool about 19 years old one of the posts on the frame is listing and that area of the pool is no longer level Is there a danger of the pool collapsing How can you fix it?
The metal frame of above ground pool provides the structure to hold the water. The metal frame needs to be level and aligned for the forces of the water to be evenly distributed around the frame. If one portion of the frame is "listing" or bent or leaning outward, that means that the forces from the water will not be evenly distributed and the pool may be at risk of collapse (depending upon the extent of the list or bend in the frame). Inspect the post to determine the cause of the list. The two most likely causes are: (1) the screws or bolts have become loose, or (2) the post is rusted. If the screws or bolts are loose, re-tighten or replace them to correct the list. If the post is rusted, then it will require replacement.
