I have a 99 Sable with the OHV 3.0 liter. I have the same problem. Things I have changed so far: the engine computer or (PCM) , the crankshaft position sensor, and the ignition coil. Still have NO spark to the engine. The spark plugs don't spark. I am still waiting for more info. Let me know if you have changed something I haven't. Thanks.
my 1993 accord doesnt have spark
Ummm...in the engine?
On a Mercury Sable , V6 engine : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
Three on each side of the motor. Follow the spark wires.
The recommended spark plug gap (per NGK) is .039"
.044 inch
Do you have a hot start kit installed? Perhaps it is the relay switch?. Have had the same problem with both an 87 and 88 Cabriolet. Not sure if that will help but you never know! Larissa
It is getting fuel/spark/ compression?
The spark plug gap for a 1993 Mercury Sable with a 3.8-liter engine is typically between 0.054 to 0.056 inches (1.4 to 1.5 mm). It's important to check the vehicle's owner manual or service guide for specific recommendations, as variations may exist based on engine specifics or modifications. Always ensure that the spark plugs are properly gapped before installation for optimal engine performance.
The recommended plug gap for the 1993 model, 3hp Evinrude outboard is .030 in.
it might have a bad cam positioning sensor
The timing belt has failed.