Check your fuses, if there's nothing wrong there, trace down the wiring and check ALL OF IT, even the smallest break or short can cause major problems. All you need is a multimeter and someone to press the brake pedal, check all the brake light bulb connectors, you should get a 6 - 12V reading. If you get a reading less than that, then you might need to replace your wiring.
if the tail lights work but not brake lights then its most likely just a blown fuse or it could be the switch at the top of your brake pedal arm.
what is the bolt pattern for a 1987 Chevy silverado
most likely a clog in the line or wheel cylinder or maybe a broke spring
the book says dot 3 good luck
No.
The starter relay on a 1994 Chevy Silverado is mounted on the starter. The starter and relay are usually changed as a single unit.
NO.
NO it does not.
1994 Chevy fenders fit a 2000 Chevy
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
no,it wont.they are different sizes.just order it off of the internet.
Brake Lights Stay on Unless the Brake Pedal is RaisedThis is usually caused by the brake light switch being out of adjustment in its physical distance to the contact point on the brake pedal arm.