answersLogoWhite

0

To flush the radiator of a 1995 GMC Vandura 2500 with a V6 engine, start by ensuring the engine is cool and then remove the radiator cap. Place a drain pan under the radiator and open the drain valve to let the old coolant flow out. Once drained, close the valve and fill the radiator with a mixture of water and radiator flush solution, running the engine for about 10-15 minutes to circulate the flush. Afterward, drain the system again, rinse with clean water, and refill with fresh coolant.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

Is the fuel system in a 1995 gmc vandura 2500 pressurized?

Yes


Were is the computer on a 1995 vandura 2500?

I have a 3500 and mind is under the driver seat


Where can I purchase a throttle body rebuild kit for a 1995 GMC 2500 vandura?

autozone


Where is the starter located on a 1995 GMC Vandura 2500?

On the back of the motor next to the transmition.


Where would You locate the ECM on a GMC Vandura 2500?

The ECM on the Vandura 2500 is under the Driver's seat.


How do you change a water pump in a 1995 gmc vandura 2500 van?

To change the water pump in a 1995 GMC Vandura 2500, start by disconnecting the negative battery cable and draining the coolant from the radiator. Remove the serpentine belt, then detach any components obstructing access to the water pump, such as the fan shroud. Unbolt the water pump from the engine and clean the mounting surface before installing the new pump with a new gasket. Finally, reassemble the components, refill the coolant, and reconnect the battery.


What type of radiator is in a 1990 gmc vandura 2500 van?

The 1990 GMC Vandura 2500 van typically comes equipped with a brass and copper radiator. This type of radiator is known for its durability and efficient heat transfer, making it suitable for the van's heavy-duty performance. It's important to check the specific engine type, as variations might exist based on options and configurations. Always refer to the vehicle's service manual for precise specifications.


Where do I look if my 1995 GMC Vandura 2500 has a water leak?

Water Pump? Start by inspecting your hoses first it may just be a clamp.


Why does your 1995 gmc vandura 2500 stall when the accelerator is pressed?

fuel filter has to be changed every 8000 miles or sooner if it plugsup sooner


Why no heat in 1995 Vandura 2500 van?

Could be,low on coolant, faulty thermostat, plugged heater core, temp blend door malfunction,


Where is the relay and fuse for the fuel pump on a 1995 gmc vandura 2500?

In a 1995 GMC Vandura 2500, the fuel pump relay is typically located in the under-hood fuse box. The fuel pump fuse is also found in the same fuse box. For specific locations, refer to the fuse box cover or the vehicle's service manual for the exact relay and fuse numbers.


What is the wheelbase for a 1983 vandura 2500?

There are to sizes 110"and 125".