its most likely your lifters tickin cuz there worn out / pumped out of oil replace them..... wont ruin motor just robs hp
Yes it will it's the same
Yes.
1997 S10 4 cylinder engine pressure plate to flywheel bolts, 33 ft lbs.1997 S10 V6 engine pressure plate to flywheel bolts, 29 ft lbs.
5 Quarts.
Chain
Passenger side of engine block.
The engine coolant temp (ECT) sensor on that 97 S10 2.2L would be found close to the thermostat.
Replace the engine coolant temp sensor.
It is on the passenger side of the engine block, aprox above the starter.
why is my draftshaft for a 2003 s10 making a noise
It is part off the engine oil cap, remove it and you will see it.
Fuel pressure for a 1997 Chevy S10 with a 4.3L engine requires 60 to 66 psi.