The knock sensor is located on top of the engine block underneath the intake.
The knock sesor is located, on your Isuzu 1290, at the front of the engine. The sensor screws into the engine. Wires connect the sensor to the senor light.
On a 2001 Isuzu Trooper, the knock sensor is typically located on the engine block, near the intake manifold. It is generally positioned on the driver's side, towards the rear of the engine. To access it, you may need to remove some components, as it can be somewhat hidden. Always refer to a service manual for precise location and guidance.
location knock sensor 2002 pontiac grand prix gt 3.8 engine
The knock sensor is on the side of the Escort engine block. It is located close to the oil sensor.
location of knock sensor in 1997 cheverolet Tahoe SUV 305 or 350 engine
If you have the 7MGE engine: Then the knock sensor is screwed into the engine block, directly underneath the intake manifold.
The knock sensor is under the intake manifold between the heads toward the rear of the engine.
The knock sensor on a BMW 740Il is located on the top of the engine. It is mounted under the intake manifold.
The knock sensor on a Passat is located on the side of the engine. It is just below the number two cylinder spark plug.
4.3L, behind engine, on top,
The knock sensor just advances and retards the engine timing only. If there is a noise in the engine then you have engine are valve train problems. The knock sensor will not make the engine knock.
For the exact location of the knock sensor, check your owners manual. There should be a diagram of the engine and all parts.