i need a diagram for my 95 Chevy beretta for the 2.2L engine. I'm tryin to replace the timing chain, and i need to know what to take off and what not to take off
Rear of the engine block.
5800 RPM
22L (liters) is 5.81 US gallons.
it is next to the coils at the rear of the engin between the tranmission and the engin
The thermostat is on the water pump.(the left side in the front of the car) 2 screws to take out that's all
GM doesn't have the fuel pump inertia switch. That's a Ford thing.
lr stands for long rifle(uses a bullet) I dont know where you got 22l from
Timing marks? There is a timing mark on the main crankshaft pulley as well as marks on the timing belt cover to line it up with. There is also marks on the cam gear, with the #1 and that arrow being most important, as well as an arrow or other mark on the cylinder head to line it up with. All of these need to line up in order for the timing to be correct. Then the distributor can be moved left or right to fine tune the timing to spec.. -Shaun
My 97 cavalier 2.2L engine takes 4 quarts. There are two different 2.2 Chevy motors. One holds about 4 qts. and one holds about 5qts. Always check after filling and circulating the oil.
Impossible to answer without more information
50-200 usd
10-1000 USD depending on specifics.