Sounds like flasher is defective and will soon need to be replaced
A clicking noise from the dash on a 2003 Mercedes Benz might be the flasher for the turn signals. Sometimes the flasher will make a clicking noise if it is about to go out, to let the driver know it is time to replace the flasher relay switch.
Replace the turn signal switch.
My Flasher unit is clicking real fast but the turn signal does not work. Is this the flasher or a furse?
it is not the hazard system, but comes from the speedo cable which is routed behind the dashboard thus making it sound like the flasher unit.
The cause for a turn signal flasher to keep clicking on a 1999 GMC Jimmy is a bad flasher unit. Replacing this with a new flasher unit should solve this problem.
where is the flasher unit on a 2004 Chevy classic? where is the flasher unit on a 2004 Chevy classic and could it be causing the clicking noise in the dash?
the flasher relay.
change the flasher relay
In Subaru Car. Make clicking noises when work.
locate it by turning on your emergency flashers and listening for the click. once you find the unit that is clicking, you have found the flasher unit
If your new flasher is making a fast clicking noise, it typically indicates a problem with the circuit, such as a burned-out bulb or a poor connection. This rapid clicking is the flasher's way of signaling that it isn't detecting the correct load. Check all the turn signal bulbs and their connections to ensure they are functioning properly. If everything seems fine, consider replacing the flasher unit again, as it might be defective.
tweezers and gfs little hand