0
What else can I help you with?
What size are the lug nuts on a 2002 ford f150?
The lug nuts on a 2002 Ford F-150 typically have a thread size of 1/2-20 inches and a hex size of 13/16 inch. It's important to confirm the specifications for your specific model, as variations can occur based on wheel options. Always ensure to use the correct size to avoid damaging the lug nuts or wheel.
Would 2004 ford F150 stock rims fit a 2002 F150?
yes as long as its a five lug wheel
What size socket for lug nut on Honda Accord?
19mm
What is the lug nut size for the 2004 F150 newer body style?
I have a 2009 its 21mm
What is the socket size for a 2007 Kia Rio lug nut?
think it's a 17mm size
What is the socket size for a 2009 Honda civic lug nut?
19 mm
What is lug wrench size for 2004 Chevy express van?
The lug wrench size for a 2004 Chevy Express van is typically 21mm or 13/16 inches, depending on whether the vehicle is equipped with metric or standard lug nuts. It's best to verify the size by checking the lug nuts on your specific vehicle, as there can be variations. A cross-style lug wrench or a socket wrench with the appropriate size socket will work for changing tires.
What size lug does a 21mm socket fit?
A 21mm socket typically fits a lug nut that has a 21mm hex head. This size is commonly used for various vehicles, especially those with metric fasteners. It's important to ensure that the socket is compatible with the specific lug nut design, as some may have additional features like rounded edges or locking mechanisms. Always check the vehicle's specifications for the correct lug nut size.
What is the lug nut size for a 2007 Honda CR-V?
The Honda CR-V lug nut size is a 19 mm lug nut. The 2000-2002 size was a 21mm lug nut.
Will 2002 wheels from f150 harly edition fit 2002 explorer Eddie baur?
As long as they have the same number of lug nuts they will fit.
How to lower spare tire without adapter on f150 2003?
The lug for lowering the spare tire on an F150 is in the center of the rear of the truck. If the adapter is unavailable, a large flat head screwdriver that will fit inside the lug will often work. Failing that, if a socket, usually 3/16, should be able to fit over the lug and can be turned with an extender.
What size socket needed to take off lugnuts on 95 jx6?
To remove the lug nuts on a 1995 JX6, you'll typically need a 19mm socket or a 3/4-inch socket, depending on the specific lug nut size. It's always a good idea to double-check the size with a torque wrench or a socket set to ensure a proper fit. Additionally, using a breaker bar can help if the lug nuts are tightly secured.
