The Electric Fuel Pump assembly is located inside the fuel tank. Electric Fuel Pump Removal & Installation 1. Disconnect the negative battery cable. 2. Relieve the fuel pressure. 3. Raise and support the vehicle. 4. Remove the fuel tank; refer to the procedure outline in this section. 5. Remove the fuel pump retaining bolts. 6. Remove the fuel pump. To Install: 7. Thoroughly clean the fuel pump-mounting flange. 8. Install a new gasket and place the pump into the tank. 9. Ensure that the fuel tubes face toward the fuel rail and tighten the retaining bolts to 80-107 inch lbs. (9-12 Nm). 10. Install the tank as outlined in this section. 11. Tighten the fuel tank bolts to 66-91 inch lbs. (7.6-10.4 Nm). 12. Tighten the fuel tank straps bolts to 22-30 ft. lbs. (29.7-40.7 Nm). 13. Tighten the skid plate bolts to 9.3-12.7 ft. lbs. (12.7-17.3 Nm). 14. Connect the negative battery
In the fuel tank.
It is inside the fuel tank.
On a 1998 Ford Expedition : The ELECTRIC fuel pump is INSIDE the fuel tank
The electric fuel pump is INSIDE the fuel tank on a 2003 Ford Expedition
The electric fuel pump is INSIDE the fuel tank on a 2004 Ford Expedition
The electric fuel pump is INSIDE the fuel tank on a 2004 Ford Expedition
The electric fuel pump is inside the fuel tank
The electric fuel pump is inside the fuel tank
were is the fuel pump relay located in 2000 ford expedition?
The electric fuel pump is inside the fuel tank
The electric fuel pump is INSIDE the fuel tank
The fuel pump is located inside the fuel tank. To get to the fuel pump, you have to remove/drop the fuel tank it.