it is either the key is worn out or the key cylinder in the ignition is worn out.
Where is the turn signal flasher on a 2002 impala
turn the ignition to the on position and press the gas pedal 3X in 5 seconds if it doesn't work the first time repeat the procedure. turn off the ignition then turn it back on it should flash then go out
fuel pump probably, common problem among later model impalas
turn the ignition key on (don't start) and depress the accelerator pedal 3 times within 5 seconds.
Is the steering wheel turned hard against the lock? Try moving the steering wheel back and forth hard at same time turn key.
The ignition tumbler will not turn and you will not be able to start the car.
Ignition switch 2002 Chrysler sebring. Original key will not turn? Is there a fuse or replace the switch?
Probably in the fuse bloick on the left end of the instrumnent panel
possible bad turn signal switch in the steering column or a bad ground on your turn signals.
To reset the oil change light on a 2013 Chevy Impala, first turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off, then start the engine to ensure the oil change light is reset. If the light remains on, repeat the process.
Turn the car off. push on the parking brake 1 or 2 clicks turn car on. the lights will not come on
replace turn signal kit on 1964 impala