To reset the oil life system....pretty simple. Turn your key to the on/run position. All the lights on your dash board should come on. Quickly press the gas pedal 3 times and the message will read oil life system reset. Turn the key back to the off position and your done.
The 2001 Chevrolet Suburban is equipped with one knock sensor. The knock sensor will be attached to the back of the engine.
No it does not. That engine still has a distributor.
where is the speed sensor located on the 2004 Chevrolet suburban 4 wheel drive z71
No. Upstream and downstream O2 sensors are different for a 2000, 1500, Chevrolet Suburban with the 5.3 engine.
It depends on the engine size. Some are located on the side of the engine block and some are under the intake manifold.
Under the intake
The oil pressure sensor, on your 2003 Chevrolet engine, is located on the front of the engine, just above the oil pan. The pressure sensor will have two wires going to it.
Probably either screws into the exhaust near the engine, or screws into the catalytic converter if it sits near the engine. HTH, Chuck
The 1999 Chevrolet Suburban speed sensor is located on the back of the transmission. The speed sensor will be in the upper left-hand corner.
The 1999 Chevy Suburban camshaft sensor is located on the front of the engine. The camshaft sensor will be behind the front engine cover.
The throttle position sensor on a 2003 Chevrolet Suburban is located on the side of the throttle body. It notifies the vehicle's computer of the actual position of the throttle plate in relation to the throttle body.
take it to a dealer