0
I posted this message but what I really need to know is the part number for the hazard light switch
Because I broke mine doing the sound system
Me Helmet, has the same problem with my 1996 GMC Jimmy. I went to my local Chevy dealer to see if they had a switch but it turns out it is the entire cruize control, wipers and turn signals. So it ends up costing around 450 dollars for the entire piece but I am doing the cheap way out and trying to fix it myself. But do not do this unless U Know have alot of common scene and patience.
I just replaced my 1995 blazer switch assemble and i don't know lot about everything, but if i don't know how to do something i get on the web, it cost me 79.00 dollars for a brand new one and it took me 2 hours to put it in, you don't have to take off the sterriw wheel. I have good frinend that works for Firestone and he just had the right tool, I would never go to a dealship and but parts, your paying 300% more and getting the same part. it so easy, plus I put color bulbs in the cluster, why I was doing the switch. Like I said shop on the web, your find the same part for penneys
What else can I help you with?
What causes hazards to go on by themselves on a Chevy blazer?
Faulty hazard switch
Is there a fuel pump reset switch for a 1992 Chevy blazer s 10?
No. A Chevy Blazer does not have a reset switch.
How do you manually shut off the kill switch on a 1996 Chevy blazer s10?
There is no "kill switch" on that Chevy Blazer.
1995 Chevy Blazer and the hazard the turn signal and brake lights do not work Does anybody know why?
The hazard switch and the turn signal and brake lights are all incorparated, chances are the 3-1 switch is broke internally check all fuses
Location of inertia switch on a 2000 Chevy blazer?
A 2000 Chevy Blazer is a GM vehicle. Vehicles made by GM do not come equipped with an inertia switch.
What year did the Chevy Blazer switch to r134a?
1994
Where is inertia switch on 1998 Chevy S 10 Blazer?
where is the fuel pump inertia switch located on a 2000 blazer
Where is the oil pressure switch located on a 1998 Chevy Blazer?
The oil pressure switch on a 1998 Chevy Blazer is on the side of the engine block. It is located above the oil filter.
Does the fuel pump in a 1998 Chevy Blazer have a kill switch?
No.
Where is the inertia switch located on a 1996 Chevy blazer ls?
They were not used on Chevy trucks.
Where is the parking brake switch located on a 1998 Chevy blazer?
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
Where is the actuator switch on 1997 Chevy Blazer?
The 1997 Chevrolet blazer actuator switch is located on the firewall in the engine compartment. The switch is on the passenger side of the engine compartment.
