0
What else can I help you with?
Why would all the gauges not work on a 2000 dodge ram and the odometer flash and then says no bus and will not start?
There is a major communcaion problem between the computers on your truck. You will need to have it brought to a qualified repair shop. You can not diagnose this problem without a scan tool.
Why does your dodge ram 1500 van have a no bus code?
The "BUS" is the system Chrysler uses for it's computers to communicate on this truck. The error in the odometer means that the cluster is not receiving any messages.The "BUS" is the system Chrysler uses for it's computers to communicate on this truck. The error in the odometer means that the cluster is not receiving any messages.
Why would your 1999 dodge ram 1500 die while driving with no warning and then when trying to restart it all the gauges come on and the odometer say no bus?
I have a 99 Dodge Ram 1500 5.2 4x4 and it was stalling for no apparent reason, I finally gave up and changed out the ecu (the computer). If your having the same issue a quick fix is to turn your ignition off, then back on and leave it on, disconnect the wiring harness from the ecu unit, then plug them back in.(The ecu unit is on the passenger side firewall under the hood). You will see your gauges come back on. If the gauges are not on, you have to redo the process. JWFryer
Why does my 2000 dodge Ram Pickup odometer show NO BUS then engine stalls but the gauge lights still work?
On a 2000 Dodge Ram, "no bus" means the communication network between modules has quit working. Any module on the network or the wiring between them can be the cause of the malfunction.
What is no bus in the dash of a dodge?
The "bus" is the system the computer on the Ram use to "talk" to each other. The "no bus" message on the odometer means that the system has failed. You will need access to a scan tool to diagnose. Any computer on the truck or any of the wires in between can cause this problem.
Why does Odometer says NO Bus 2001 Dodge Ram Diesel after totally dead battery and a reverse polarity jump but no start found blown fuses but still no start or gauges?
The "Bus" is the communication system for the computers on the truck. "No Bus" means that the communication system is not operating. You need a scan tool and a wiring diagram to diagnose why the computers can not talk to each other. It could be a failure of any of the computers (engine, ABS, airbag, cluster, overhead console......) , or a wiring issue between the computers.
2003 dodge ram 1500 no bus warning in the odometer reading. what does it mean?
It means that there is a failure in the communication system between the computers on your truck, you will need to have it diagnosed with a scan tool.
Dodge ram 1999 says no bus?
The "bus" is the system the computer on the Ram use to "talk" to each other. The "no bus" message on the odometer means that the system has failed. You will need access to a scan tool to diagnose. Any computer on the truck or any of the wires in between can cause this problem.
Why do the gauges and turn signals stop working and also the odometer displays no bus but the car will start and run and drive on your 2001 jeep Cherokee?
The cluster connector needs cleaning. Take off the cluser and clean connector and grease with dielectric grease.
What is code No Bus on a 2008 Dodge Ram 2500 diesel?
The "bus" is the system the computers on the Ram use to "talk" to each other. The "no bus" message on the odometer means that the system has failed. You will need access to a scan tool to diagnose. Any computer on the truck or any of the wires in between can cause this problem.
What does no bus mean in the digital odometer on a jeep Cherokee?
The bus is the communication network between computers on the Jeep. No bus means the system has failed.
P1687 driver 5 line 7 dodge Intrepid What does Drivr 5 Line 7 mean and were is it and how do I fix it?
Dodge P1687 is -P1687-No Cluster Bus Message More than likely a faulty PCM.but will need further diagnosis using a flow chart for this code.
