0
After upgrading your motherboard why would your monitor take time to turn on after the CPU light is on?
Your motherboard/bios tells the video card to turn itself on/off. This particular model does it a little later than your old board did. If you can reboot and see more of your boot up sequence than on "power up", then this is the case. The the monitor would already had received its power on command and be ready to turn on than from cold state.
What else can I help you with?
Can your Intel gma 3100 be upgraded?
No. The GMA 3000 is integrated into the motherboard. Upgrading it would entail replacing the motherboard. If on a desktop machine, a better graphics card may be inserted into an expansion slot.
What improvements would be by upgrading the motherboard?
Some motherboards are extremely large and will not fit in some cases.. that can be an issue, though it will be immediately obvious. A more important check is that your parts will be compatible with the board which will simply require some quick research. Beyond that, there's nothing to worry about
What are the two component of computer?
Hardware and software - without either one, there would be no computer! A simplistic answer would be the motherboard and hard-drive, though without an operating system the monitor would be blank.
If a PC does not boot properly and you hear a single beep then the problem is?
I would check the two power cables in the motherboard or I would check the display. Another thing to do is clear the CMOS on the motherboard, that may fix it. FYI What is "doesn't boot properly" these are answers if you don't see anything on the monitor.
Is it possible to have dual monitor output both monitor using dvi One port on graphics card one on motherboard?
Yes, it is possible to have dual monitor output using one DVI port on a graphics card and another from the motherboard, but it depends on your system's configuration. If your CPU has integrated graphics and the motherboard supports it, you can enable both outputs in the BIOS/UEFI settings. However, this setup may not provide optimal performance for graphics-intensive tasks, as the monitors would be using different graphics sources. Always check compatibility and settings for your specific hardware.
How do you buy motherboard?
I would recommend googling the the number on the old motherboard.
How much memory can a motherboard hold?
depends on the motherboard, but average would be 4gb.
Which motherboard would be best for a graphic designer?
A abit LG-957 motherboard would be best for a graphic designer.
Why would you change your motherboard?
you would want to change your motherboard basically why i want to..is that you bought a PCI-express card but your motherboard doesnt support that.or you want a faster processor that your old motherboard doesnt support. hope this info helps.
What kind of motherboard would a Gateway computer from 1998 have?
Depending on it's size, it would likely have either an ATX or microATX motherboard.
After you install the motherboard and connect all the cables and cords you next install the card and plug in the keyboard and monitor?
modem ^ original answer. My vote would be the video card. Most "modems" are going to be embedded.
What would you have to do before considering changing a motherboard?
you would have to consider if there are other hardware upgrades that would have to be done as a result for instance if you have a motherboard with ddr ram but the new motherboard has ddr2 you would have to by new ram same with power supply and even hard drives
