0
Bearing/Hub: Apply grease sparingly to the inside of the hole through the steering knuckle (NOT the hub/bearing). Install the hub and tighten the three hub retaining bolts to 70 ft lb (95 Nm).
Axle nut: 118 ft lb (160 Nm)
Brake caliper carrier (caliper bracket) bolts: Clean threads with alcohol, apply thread locking compound to bolt threads, allow to dry for ten minutes. 133 ft lb (180 Nm)
Wheel lug nuts: 100 ft lb (140 Nm)
What else can I help you with?
How much torque does the engine in the 2006 Buick LaCrosse have?
The 2006 Buick LaCrosse's engine produces 230 ft-lbs. @ 4000 rpm.
What are torque specs for 2006 lacrosse water pump?
The torque specifications for the water pump on a 2006 Buick LaCrosse typically range from 89 to 106 inch-pounds (or approximately 10 to 12 Nm). It's important to follow a specific tightening sequence and to use a torque wrench for accuracy. Always refer to the vehicle's service manual for the most accurate and detailed instructions.
Where is the thermostat on 2006 Buick lacrosse?
Thermostate on buick lacrosse
What size engine does the 2006 Buick LaCrosse have?
The 2006 Buick LaCrosse has a V6 engine.
How many valves does the 2006 Buick LaCrosse have?
The 2006 Buick LaCrosse has 12 valves.
What kind of transmission does the 2006 Buick LaCrosse have?
The 2006 Buick LaCrosse has a 4-speed automatic.
What is the cam type of the 2006 Buick LaCrosse?
The 2006 Buick LaCrosse has overhead valves (OHV).
Is the 2006 Buick LaCrosse electric or gas?
The 2006 Buick LaCrosse is a gas-powered vehicle.
How tall is the 2006 Buick LaCrosse?
The height of the 2006 Buick LaCrosse is 4 ft. 9.4 in. (57.4 in.).
What kind of fuel does the 2006 Buick LaCrosse use?
The 2006 Buick LaCrosse runs on regular unleaded.
What is the curb weight of the 2006 Buick LaCrosse?
The curb weight of the 2006 Buick LaCrosse is 3495 lbs..
What is the turning circle of the 2006 Buick LaCrosse?
The 2006 Buick LaCrosse's turning circle is 40.4 ft..
