Just did mine.First thing undo your battery negative cable from the battery.Its under your car next to the right side[passenger side] catalytic converter.Its about 12 inches away from your passenger door near the front tire next to the exhaust pipe. Big pain if you dont have the correct tools.If your a contortionest you can just undo the wires at the front of the vehicle end then unbolt the two bolts holding it and dont forget the battery.Auto part websites have illustrated instructions. Good luck, Brian
C4 Got a new Starter but engine doesn't turn or engage?
That is a lengthy answer, feel free to go over to Smokinvette.com and you will find the correct answer with diagrams! Good luck!
"Corvette Mike" over at Smokinvette.com knows just about everything you can imagine about C4 Corvettes! Good luck!
Once again, seeing that I don't know a whole lot on the C4 Corvette I would ask this question in the C4 technical section on Smokinvette.com and get a dead on answer! Good luck!
230
Jump on over to Smokinvette.com and there are diagrams for every C4 in the C4 section. Just ask "corvetteDon" he has a ton of information on C4's! Good luck!
Corvettes in the model years 1984 through 1996.
where is the 1990 c4 fuse for the hore
My 89 Corvette which is also a C4 recommends 35psi on all 4 tires
I would use a big hammer.
It depens. 1995 was a strange year for a lot of reasons. "Run Flat" tires were just coming into use, and the Corvette had the "RPO N84" option, saving the new car buyer $100 in return for deleting the spare tire. (This was found at: http://www.coolc4.com/1995-Corvettes.htm and other Corvette sites) Check your car's line setting sheet that gives all the codes of how it was manufactured. As for a complete listing of codes, and how to get a build sheet for your car, see:http://forums.corvetteforum.com/c4-general-discussion/956104-c4-rpo-faq.html Enjoy your car!
yes an it will look good