0
What else can I help you with?
Can a 350 Chevy engine and a 450 transmission fit in a 84 cutlass?
GM never made a 450 tranny, you probably mean a turbo 400 tranny and yes it can be done.
Where is the pcv valve on an 84 Cutlass Supreme with a 3.8 liter engine?
It is behind the throtle body in the intake.
Will 89 heads fit on a 84 350 block?
yep
Is a vortec v6 96 Chevy blazer interchangeable with a 307 v8 84 olds cutlass supreme?
no you dummy
What is a bolt pattern for a 84 Oldsmobile cutlass supreme?
The Bolt Pattern Is 5x4.75 (5 Meaning There Are 5 Lugs)
After changing the transmission on a 84 cutlass supreme it does not shift into 2nd gear What should you check next?
The detent cable adjustment.
Would a a 350 5.7 vortec fit in a 84 Monte Carlo?
Yes
84 Cutlass Supreme you had replaced the starter 4 times in 5 months and installed a flexplate but it still grinds?
You might have a bad flywheel.
Will an oil pan off a 96 305 vortec fit a 84 350 block?
no
Is There an 1984 cutlass or 1985 cutlass engin that would fit in a 1972 cutlass?
84 and 85 cutlass's came with olds 307 small blocks. and others came with V-6's. now an olds 307 will slide right into a 72 cutlass (i have one also (: as long as the cutlass was a v-8 (olds 350 rocket and olds 455's were the v-8s that came in the 72's.) so yes the bolt pattern on the tranny and the engine mounts will all match up with the 307 if the 72.
What happens if the oil dipstick compartment comes out of the engine when checking the engine oil in an 84 cutlass supreme?
If the place where the dipstick for the oil is comes out of the engine it will cause an oil leak. The engine might not be able to build up enough pressure to keep running either on the 1984 Cutlass Supreme. It should be replaced.
Where is the fuel pump located on a 1984 Oldsmobile cutlass supreme?
it is located on the driver side underneath the engine. its circular in look with two lines one leading to the carburetor. two bolts leading into the engine. also there is a rod inside the mechanical fuel pump.
