i know for a fact that a 93 tempo can be...the size belt is 62"
you can buy smaller pulleys and they are called underdrive pulleys, check out summitracing.com.
Pulleys is the plural form; the singular is pulley.
Two kinds of pulleys are the fixed pulley and the movable pulley
Pulleys can be used to increase torque or speed, depending on how they are configured. When the pulley with a larger diameter is driving a pulley with a smaller diameter, torque is increased while speed is reduced. Conversely, when a small pulley is driving a larger pulley, speed is increased while torque is reduced.
In automotive terms, There are drive pulleys such as the drive pulley mounted to the crankshaft on most engines. There are driven pulleys such as an alternator, power steering, water pump, a/c compressor and all the accessories driven by the drive pulley. There are idler pulleys and tensioner pulleys. There are timing belt pulleys. And for non automotive related terms, There are block and tackle pulley systems. There are pulley hoists. Wire rope pulley blocks. Cable pulleys. Rope pulleys.
There are fixed, moveable, and compound pulleys.
When using three pulleys with a belt where one of them is a small pulley, the small pulley will spin faster compared to the others. This is due to the principle of rotational speed being inversely proportional to the radius of the pulley. The small pulley has a smaller radius, so it will rotate faster than the larger pulleys in the system.
Using multiple pulleys in a system can reduce the amount of force needed to lift a load. Each additional pulley reduces the amount of force required by half, making it easier to lift heavier loads with more pulleys.
The two kinds of pulleys are fixed pulleys and movable pulleys. Fixed pulleys are stationary and change the direction of the force applied, while movable pulleys have a free end that moves and both change the direction of the force and provide a mechanical advantage.
pulley system
The pulley with the smaller diameter will turn faster than the pulley with the larger diameter, assuming both are connected by a belt or chain. This is due to the relationship between the rotational speeds and the circumferences of the pulleys.
Gears Are Relevant To Pulleys Because Gears Turn Into Circles So Do Pulleys The Difference Between A Gear And A Pulley Is... A Pulley : Pulley Has Strings To Hold On One Goes Up And The Other One Across A Gear : A Gear Has No Strings To Hold On Woozworld/Weeworld Try These Games There AWESOME!