If I read your question correctly, no. The ECM (engine Control Module) is the computer that controls the engine injector and all it's related idle controls. In addition, it controls all the smog controls and mixture to the engine.
It would be tough for the engine to run correctly without proper control.
Don't be scared of the ECM and the related controls, they are all very predictable.
It's right behind the drivers side speaker, by the steering wheel in a 92 geo tracker. But I've read that you can bypass the ECM if your geo isn't starting but cranks. It's make a jump wire from the main black wire from the coilpack to the red wire on the fuel injector. Im about to try it with mine. Hope this helps. ! Good luck.
YES, as long as both engines are a 1.6L 8V then the ECM's are the same.
Yes i have a discount ecm warehouse ecm installed in my tracker .i have had very good luck with there product.fast shipping great product and no high core charges.
it is behind the drivers side speaker u have to remove the speaker, und bolts on ecm and lift it out. then you put in the new one a plug it in. no programming is required.
No. The ECM not only actuates the fuel pump, but also adjusts the rate at which it pumps fuel.
Hi, Try this place : Quality Auto Parts www.qaparts.com I've had great luck with them. Steve H.
The PCM is located on the left side of the dash. Remove the speaker grill and then remove the speaker to gain access.Read more: Where_is_the_electronic_control_module_on_a_1992_geo_tracker
Try looking under the dash on the drivers side, i belive you will see the fuel pump relay along with the "ECM".. good luck
you will need the ecm that goes with that motor, or have your ecm reprogramed but i dont know were you can have that done.
reprogram ecm.
Yes. Edit, yes, but if you are dealing with a swap from the SOHC to a DOHC other parts are needed like the motor mount and ECM.
Is there a way to bypass the ECM in a 1993 chevy s10 4.3 vortec