Yes, you can clean the Idle Air Control (IAC) valve on a 2001 Yukon. To do this, you'll need to remove the IAC valve from the throttle body and use a throttle body cleaner or a similar solvent to clean any carbon buildup. Ensure to follow safety precautions and allow the valve to dry completely before reinstalling it. Regular maintenance can help improve engine performance and idle stability.
how can I clean the Idle Air Control Valve on a 1998 Nissan Frontier
Open the hood of the car and find the idle air control valve. The valve is located on the Gran Marquis' throttle body. The idle air control is a cylinder with a wire connector plugged into it. If needed, refer to your repair manual for an exact diagram. Read more: How to Clean the Idle Air Control Valve in a 2001 Grand Marquis | eHow.com http://www.ehow.com/how_7649344_clean-valve-2001-grand-marquis.html#ixzz1eqCpBmRx
idle air control motor has to much build up of carbon, clean it
Leave it alone. Clean the ignition air control module takes 5 min. With a beer!
U need to clean the throttle body and also clean the idle air control vavle
The idle is not adjustible. You may need to clean the throttle plate to improve the idle.
On idle speed control actuator is located on the front of the air intake plenum
clean or replace your idle air control valve.
It is on the air intake near the left side of the alternator.
The idle air control valve controls the neutral idle of the 2001 Honda Accord. A faulty idle control valve leads to an erratic idle. To replace it first locate the valve on the intake manifold. Unplug the unit and remove the three bolts holding it to the manifold.
my 2002 volvo s-40 is miss firing and it is alleged that the fault is from the idle air control valve. how can i clean the valve?
The idle air control valve on a Volvo S80 is located on the intake manifold. The valve controls the rate at which the engine holds an idle.