0
What else can I help you with?
How do you retrieve the codes on a 2000 tracker without a OBD2 scanner?
since 1995 to present, you have to retrieve codes by use of a obd2 scanner.
How do you read the codes for a 2002 Chevy Tahoe without scanner?
You can't. It requires a scanner to read them.
How do you check engine codes on a 2003 Chevy 2500HD without scanner?
You can't, you must use a scanner.
How do you diagnose which sensor is bad without scanner in a 98 grand caravan battery got disconnected so the codes are gone?
You can't. You need the codes and a scanner.
Is there a way to pull flash codes from a 2004 Ford Freestar without a scanner?
No obd2 requires a code reader or scanner.
Reset check engine light in 01 Oldsmobile alero?
get a code scanner, or borrow one from a parts store, plug it in and clear codes
How do you pull the trouble codes on a Ford Taurus without a scanner?
From '96 up the Tauri (and all cars) had OBD2 systems, which (I believe) can not be read without a scanner. Many chain auto parts stores will check codes on these cars for free.
How do you read diagnostic codes on a 2001 Town car without using a scanner?
CHECK OWNERS GUIDE
How can you read engine malfunction codes on a 2003 silverado without a scanner?
Most vehicles after 1995 incorporate the OBDII system and you have to use a scanner to retreive the codes. However, there are auto parts stores such as Auto Zone that will scan it for you ay no charge.
2005 ford F150 how to get diagnostic codes?
To retrieve diagnostic codes from a 2005 Ford F-150, you can use an OBD-II scanner. Plug the scanner into the OBD-II port, usually located under the dashboard near the driver's side. Turn the ignition to the "On" position without starting the engine, and then follow the scanner's instructions to read the trouble codes. Additionally, you can reset the codes by disconnecting the battery for a few minutes, but using a scanner is the most effective method for diagnosis.
Can a OBD II scanner erase trouble codes and have the vehicle pass inspection?
The scanner can erase codes but if there is a problem the codes will immediately come back. So the answer is no.
How do you get codes from a Jeep liberty?
To retrieve diagnostic trouble codes (DTCs) from a Jeep Liberty, you can use an OBD-II scanner. Simply plug the scanner into the OBD-II port, typically located under the dashboard near the driver's seat. Turn on the ignition without starting the engine, and follow the scanner's prompts to read the codes. Alternatively, you can also use the "key dance" method by turning the ignition on and off several times to display codes on the odometer, but using a scanner is more reliable.
