YES it will bolt right on with no problems. You WILL need the headlight wiring harness from a '70 to accommodate the 4 headlight system though.
Yes.
No it will not.
unplug all the wires associated with the front end and start unbolting everything else.
Yes, the front clips will interchange.
It should just have a slide clip that holds it in.
Rephrase. Front clip...what exactly is the front clip?
To remove the glove box lock on a 1971 Chevelle, first, open the glove box and locate the lock mechanism. There will typically be a retaining clip or screw securing the lock in place; remove this using the appropriate tool. Once the securing mechanism is removed, you can pull the lock out of the glove box door. If necessary, gently pry around the edges to free it completely without damaging the door.
The word "paper" can be put in front of "aeroplane" to form "paper aeroplane," in front of "bag" to form "paper bag," and in front of "clip" to form "paper clip," but it does not typically go in front of "towel."
A "C" clip resembles the letter "C". As an example, a "C" clip retains the front halfshaft into the transaxle in most front wheel drive vehicles.
Check eBay and you should able to see a picture of one. I'm not a bodyman, but I believe a clip consists of the two front fenders, grill and hood. A Front Clip consists of the complete body parts from the front: radiator support, front fenders, hood, and bumper, spoilers, lights etc. The complete front assembly A front clip is every thing from the firewall forward
front clip from a 94 and 96 lincoln interchaneable
There is sring clip on the front of the seat on the right hand side (if you are sitting on the seat your right hand side). Move the seat as far forward as you can and then with a scredriver press the clip towards the floor. You will need a light to see this clip. It took me a few days to figure out how to remove the seta. Good Luck Murray