No
there is no frame on a 95 monte, it's a unibody.
Yes... Sort of anyway. The Monte Carlo uses a 4 door Chevelle frame even though the Monte Carlo is a 2 door car. The 4 door frame is longer than the 2 door Chevelle frame. and the wheelbase is 4 inches longer. So if you have a Monte Carlo, a 4 door Chevelle frame will work. If you have a 4 door Chevelle, a Monte Carlo frame will work. If you have a 2 door Chevelle, then you will need to use a frame from ANY 2 door GM A body except for the Monte Carlo.... The Tempest/Lemans/GTO, Cutlass, Skylark, and Chevelle all used the same frames and are completely interchangeable.
On a 2000 Chevy Monte Carlo it is along the frame rail on the drivers side
Any 87 Monte Carlo frame will work as it's the same thing.
lol lots of frame work but been done
It is on the driver's side frame just forward of the gas tank.
On the frame on the driver's side just before the gas tank.
On frame rail under car usually near drivers seat area.
The fuel filter is located on the passenger side frame rail just ahead of the rear wheel. Drivers side, mounted to the frame. The fuel filter on a 1991 Caprice is located on the passenger side frame rail just ahead of the rear wheel.
located along the frame on , underneath the right side in front of right rear tire
The fuel filter is located on the passenger side frame rail just in front of the rear wheel.
There are sensors in the bumpers and frame. An impact of 5 miles per hour or above will deploy them.jd