no it would not . the final ratio is the rear end ratio the four speed transmission in uofrth is one to one as is the three speed.. you can change the ratio at the rear or put on larger tires that is all you can do also do not run the lower gears to long..
Yes, you can swap the front end of a 2004 Chevy Silverado 1500 onto a 2000 Silverado 1500, but it requires some modifications. The two models have different mounting points and design features, so you'll need to adjust the fenders, hood, and possibly the bumper to fit properly. Additionally, you'll need to consider the wiring for the headlights and any other electrical components. Overall, while it's feasible, the project may involve significant work and custom fitting.
yes
you can do anything if you have the proper tools. you will need a new gas tank lines motor mounts are in a different place on the frame, but it can be done.
pull lever to put into 4wd
i have a 92 silverado 1500. put 410 gear in and took out stock 308 gear. yours is probaly the same if you have 350 engine and 700 trans.
will a 2004 tailgate fit a 2006 Chevy
5
1500 pounds or 3/4 ton
Change motor mounts and install...
NO. The wireing harness and computer in the 1500 won't hook up to the 2500 transmission. You must put the 4L60E back in it.
Assuming that you would use the intake and the injectors and the computer from the 2000 and they are both vortec.
pop the cover take 4 screws out & put your new 1 in