A Caprice steering column can be replaced by another as long as it matches. It if comes from another Caprice of that year, it will fit properly.
you have to take the bottom steering column apart.
In most cases you will need to replace the turn signal switch on the steering wheel for your 1983 Chevy Caprice Classic rather than fixing it. To replace it, remove the horn pad and then use a steering wheel puller and compressor to remove the steering column. You will then remove the signal along with the wiring harness and bus fuses. Replace the signal and wiring and then replace the steering column itself.
Yes
Repairing a steering column in a 95 Caprice depends on what the problem is. Problems with the tilt could require the outer column to be repaired, while a binding steering might need the u joints to be replaced.
junction box mounted to the left of the steering column, the round one on the left usually
To replace the high beam switch on a 1988 Caprice, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws that hold it in place. Then, locate the high beam switch, which is typically mounted on the steering column; disconnect the wiring harness and remove the switch. Install the new switch by reversing the steps, reconnecting the wiring harness, and reattaching the steering column cover.
Any 1977-85 Impala or 1977-90 Caprice will work
yes
Under the dash and to the left of the steering column.
under steering column to the left
How to remove and replace a steering column on a 95 Cadillac Sedan Deville?
when do you know when you have a bad steering column