0
What else can I help you with?
Is a 1986 jeep 258 engine compatible with a 1987 jeep 258?
SHOULD BE, BUT YOU CAN CHECK YOUR LOCAL JUNK YARD FOR VEHICLES TO ASK THEM IF THEY INTERCHANGE, I AM SURE THEY WILL.
What vehicles come with 258 engine?
I remember the mid 70's Jeep had a 6 cylinder 258
What is the stock engine in a 1978 Jeep CJ7?
Should be the 258 cid I6
What does the block casting number 3218618 mean?
Jeep 258 engine block casting number.
How can you tell if an older jeep six is a 258 or a 232?
To determine if an older Jeep six-cylinder engine is a 258 or a 232, check the engine's displacement. The 258 has a bore of 3.75 inches and a stroke of 3.88 inches, while the 232 has a bore of 3.63 inches and a stroke of 3.88 inches. You can also look for the engine identification number, typically located on the block, which will provide specific details about the engine type. Additionally, the 258 engine is generally found in later models, so the vehicle's year can also be a helpful clue.
What is 87 jeep wrangler 4.2l 258 ci?
4.2 + engine size in liters and ci = it in cubic inches. Craig
Is is possible to swap a 242 L6 4.0L Jeep engine into a 1987 AMC Eagle with a 258 L6 4.2L engine?
With some modification it could be done The blocks are nearly the same. If you use the 258 intake and distributor in the 4.0; the only part that will need modifying is the exhaust from the manifold. I did one in a weekend using a 727 from a 91 wagoneer and a 02 4.0 engine. I used the 258 intake, carb, and distributor. I used the old v belt system to make it easy. It's easier to mod up an engine that's already running than making it work later.
How do you swap a Jeep 258 for a Chevy V8?
You have to use the bell housing from a Chevy "IronDuke" engine that was used in the jeep cj's for a few years. It will allow you to bolt a Chevy 350 engine inline with the ford t90 transmission. The Iron Duke was the Chevy engine used "Before" the amc designed their own 4 cylinder which used another bell housing that WILL NOT work for your purpose. Good Luck in changing out your engines and finding that bell housing, it's very hard to find one!
What are the torque specs on the rocker arm bolts on a jeep 1984 cj7 with a 258 8 cylinder engine?
The 1984 258 cubic inch engine rocker arm bolt torque specification is 30 pounds. You should torque the rocker arm bolts in 15 pound intervals.
What causes a 1983 jeep cj5 258 engine with carter bbd carb to start and then quit?
the carter carb, they suck. get a weber. you'll thank me later.
Where to get a Jeep amc 258 i6 dipstick tube?
www.4wd.com
Is a 1978 jeep 258 intake manifold compatible with a 1982 intake?
Yes! The intake should be the same for all of the 258 motors.
