This is what we did in case anybody is wondering. When I got a new clutchkit the mechanic didn't machine the flywheel. I got the flywheel machined and also the pressure plate (it had some burnmarks on it). There was also to much space between the clutch and the transmission (no idea how that happend) so we put a block in between and it works great now.
The transmission linkage connects the shifting the lever in the passenger compartment to the shifting lever on the transmission. You will find the shifting linkage on the side of the transmission.
There are several things that can cause shifting problems in your 1989 Chevrolet Blazer transmission. The most common cause of shifting problems is a lack of transmission fluid. Broken shifting forks can also cause transmission shifting problems.
would an automatic transmission car jerk when shifting after having had a transmission flush
The most common cause of a automatic transmission jerking, when shifting, is low transmission fluid. Fill the transmission to the full mark.
my transmission is not shifting on my 2005 Ford Taurus what could be the problem
Allison transmission not shifting
Yes, the 1995 Suzuki Sidekick does have a slave cylinder as part of its manual transmission system. The slave cylinder is responsible for engaging and disengaging the clutch. If you're experiencing issues with the clutch or shifting, it could be related to the slave cylinder or other hydraulic components in the system.
If your transmission is not shifting into third gear and overdrive it could be a parking pawl. This prevents the transmission from rotating.
The shift linkage on your Chevrolet Blazer automatic transmission will go from the shifting handle to the right hand side of the transmission. The shifting linkage is actually a shifting cable.
a broken dip stick wont cause hard shifting... the engine does not do the any shifting... your problem would be the transmission... check transmission....
Have transmission fluid and filter changed. Checked Transmission mounts
not shifting