Set fire to it!
Behind a side panel in the back of the blazer's cargo area on the passenger side, u twist the black knob and pull back the panel
You put a 14mm wrench or socket on the bolt and pull it towards the passenger side. That will loosen the belt. The tension is set automatically by the tensioner.
Pull the belt tensioner to the side with a socket and ratchet. Slide the old belt off. If possible use a helper to slide the new belt on. Release the ratchet to let the pulley hole the belt in place.
pull the handle down
pull the gas tank out and replace it
I would like to know if my 2002 chevy blazer with a stock 4.3 vortec pull 2000 lbs ?
Remove the calipers and the disk will pull right off
Pull the fuse, but the abs light will remain on.
insert a 1/2" rachet into the tension pully, pull clock wise this will relive the tension on the belt thus allowing you to remove the belt repet to install new belt. make sure the groves of the belt are properly in place before relasing the tension pully back to tension
you have to pull the transmission out-- or the enging which either is easier
It is located in the fuel tank. The tank has to be dropped to pull it out and change it.
Pry up clip on ends and pull off.