answersLogoWhite

0

You can cut a washer with the OD of the bezel and the ID of the lighter. Install the washer on the lighter, place the lighter into the bezel hole, place another washer on the back side of the bezel and then screw on the lighter retainer sleeve.

It is all easy to do. The bezel comes off with a couple of screws at the bottom. If you need help sizing the washer, I can make you one. fostermachine@aol.com

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

The cigarette lighter was pushed in and now neither the radio nor the cigarette lighter will work What could be wrong?

Most likely the fuse is blown, many cars have the cigar lighter and the radio on the same circut.


How do you fix the cigarette lighter in a 1991 MR2?

one solution is to check the 2 prongs in the lighter unit..sometimes they get pushed apart and dont hold the lighter in place to heat up...push them back together and it should work fine, but dont push them in 2 far or they wont let go of the lighter once its heated up.


How do you replace the cigaret lighter fuse on a 2001 Kia Sephia?

The cigarette lighter fuse on a 2001 Kia Sephia is replaced by opening the fuse box door and pulling the fuse out using a puller tool. A new fuse is pushed into position by applying even force.


What do you do when your cigarette lighter keeps burning fuses even if they are new and how hard is it to replace the whole lighter?

The problem is probably in the element, the part that gets hot, not in the socket, the part that is in the dashboard. Most auto supply stores carry replacement lighters, or you can find them in a junkyard. Your plug in is probably shorted out or maybe you have some foreign metal in the socket. Try plugging in another lighter. If the fuse blows without the plug in being pushed in, the socket is bad.


What is a push button barbeque lighter that produces a small electric current?

A push button barbecue lighter with a small electric current is likely a piezoelectric igniter. When the button is pushed, it generates a spark through piezoelectricity to ignite the gas in the barbecue. This eliminates the need for batteries or fuel.


When cool and warm air meet the lighter............ is pushed up over the heavier cold air?

unknowed


When cool and warm air meet the lighter is pushed up over the heavier cold air?

unknowed


Why does your 1997 Chrysler LHS cigarette lighter work but not charge your cell phone or operate your portable CD player?

The cigarette lighter in my 1997 Chrysler LHS works fine with the car charger for my iPhone 4S. Do some research and make sure that you've bought a compatible adapter that provides the correct voltage and amperage for your device. A lot of cheaper chargers can also be cheap and shoddily constructed, leading them to break easily. You also should make sure that you've pushed any charging device all the way in, or it won't be able to draw power and charge your device.


When two plates collide the denser plate does what?

It gets pushed down under the lighter plate. This process is called subduction.


What is the problem with a automatic sunroof not opening as well as the cigarette lighter not heating in a 1993 Saturn SL1?

check your fuses check the motor on the sunroof, mine was doing the same. So I pushed the wires going into the motor in the direction from the windshield to the back of the car and it works. Bad connection were wires go into the motor that works the sunroof back and forth.


What is magma pushed through out of the volcano?

Lava


What part of speech is the word way in the sentence pushed there way through?

The word 'way' is a noun, direct object of the verb 'pushed'.The noun 'way' is used as a word in the context of passage or progress on a course:Note: The correct spelling is "They pushed their way through."