Clean fuel injectors

Answer 1

You can start doing this when the engine is turned off. Just open the engine compartment and then find the location of the fuel injectors. If you are not aware of the different aspects of engines, please feel free to ask people around and get help from people who know this better. Also, make sure that no amount of fuel is pumped right into the engine before doing this. Also, remove the fuel pump, which in turn will stop fuel return. Another alternative is to install tubing, the purpose of which is to connect the fuel inlet with the fuel outlet. Now, get a pressurized solvent and hook it to the fuel injectors. Turn the engine on and start running the solvent right through the running engine. next, you can take out the cleaning supplies by turning off the engine. Later, reconnect the fuel pump as well as the fuel lines. Now, turn the engine on and see if there is improvement and if there isn't any, repeat again.

Answer 2

answer

OK THI IS IN ANY CARS I MEAN ANY FUEL INJECTORS,DROP ON FOUR CYLINDERS 1.6L DROP 1 EACH CYLINDER OF THOSE 32OZ FUEL INJECTOR CLEANERS ON YOUR TANK SO IF YOU HAVE 4 CYLINDERS DROP AROUND 5 OR 6 OF THOSE 6 IS GREAT.THE KEY IS ALMOST TANK SOULD BE ALMOST EMPTY.AFTER YOU DROP THOSE IN TANK RUN UNTIL EMPTY TANK,JUST ENOUGH GAS TO GET TO GAS STATIONS,THEN YOU WILL FEEL A DIFFERENCE SPECIALLY IF YOU HAVE NEW SPARKPLUG AT THE SAME TIME,YOUR CAR IS ALL SET FOR 20,000 MILES

Answer 3

There are several products available for cleaning your fuel injectors. Most of the products can be added to your gas tank. Fuel injector cleaning products can be found at most auto-parts stores.