I'd check the exhaust manifold first. A cracked manifold or leaking gasket can cause a sound that's a lot like what you describe.
The volume increases by a factor of four.
valve who needs ajustment
To calculate the weight of a cylinder, you can use the formula: weight = volume x density x acceleration due to gravity. First, calculate the volume of the cylinder using the formula for the volume of a cylinder (pi x radius^2 x height). Then, multiply the volume by the density of the material the cylinder is made of, and finally, multiply the result by the acceleration due to gravity (typically 9.81 m/s^2) to find the weight in Newtons.
Dirty fuel injectors or spark plugs
It remains the same or increases in surface area.
The volume increases to 9 times as much.
Lifting a piston on a cylinder of gas shows the relationship between volume and pressure of the gas. As the piston is lifted, the volume of the gas increases, which causes the pressure to decrease. This demonstrates Boyle's Law, which states that the pressure of a gas is inversely proportional to its volume when temperature is held constant.
When the diameter of the cylinder increases, the meniscus curve becomes less pronounced. This is because the larger diameter allows for a greater surface area, reducing the surface tension effects that create the meniscus curve.
It is more than likely that the clicking noise is just the sound of the fuel injectors intermitently squirting fuel into the cylinder. Yes, this is normal.
The pressure inside the cylinder of oxygen will increase as the temperature rises. This is because an increase in temperature causes the oxygen molecules to move faster and collide with the walls of the cylinder more frequently, resulting in a higher pressure.
Pushing the plunger into a cylinder decreases the volume of the cylinder, which increases the pressure inside. This is due to the gas molecules being confined to a smaller space, resulting in more frequent collisions with the cylinder walls, hence higher pressure.
No, heat does not reduce the pressure in a cylinder of an engine. In fact, heat typically increases pressure by causing gases to expand. The pressure in an engine cylinder is primarily determined by the combustion process and the movement of the piston.